Specifications

 


9

 


1
ON
4
2
3
Audio connections (X2-Gold only)
On the X2-Gold REMOTE module, audio connections are available at the two
3.5” jack sockets mounted on the side (same side as the switch bank). Note:
The microphone input (labelled ) has a dual function whereby it can either
support a mono-channel microphone or alternatively receive stereo line input.
Switch 3 on the LOCAL module controls the setting of this port: LOCAL switch 3
OFF - microphone, LOCAL switch 3 ON - stereo line in.
1 Connect the microphone
(or stereo line input) plug to
the REMOTE module socket
labelled .
Note: Ensure that the
setting of switch 3 on the
LOCAL module matches the
input to this socket:
OFF-microphone;
ON-stereo line input).
2 Connect the speaker plug
to the socket labelled .
Note: When the X2-Gold REMOTE module
is rack mounted, the audio connections
must be made after the module has been
xed in place. Access is required to the
rear and above the rack. Remember to
remove the audio connections before
attempting to slide out the REMOTE
module.
1
ON
2
3
4
Microphone (or
stereo line-in)
connection
Speaker
connection