User guide

10
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Power connection
1 Connect the output lead of the supplied power adapter to the socket labeled POWER
on the remote module.
X-DVIPRO: Output lead
from the power adapter
2 Insert the IEC connector of the separate power lead into the corresponding socket
of the power adapter. Connect the other end of the power lead to a nearby mains
socket.
3 After all connections are made, power up the monitor and remote module (then the
localmodule,ifusingtheX-DVIPRO-MS2variant)andnallyswitchonthecomputer.
X-DVIPRO-MS2: Output
lead from the power adapter