User guide

9
CONTENTSINTRODUCTIONINSTALLATIONOPERATION
FURTHER
INFORMATION
Power connection
1 Connect the output lead of the supplied power adapter
to the socket labeled POWER on the remote module.
Output lead from
the power adapter
2 Insert the IEC connector of the supplied power cord into the corresponding socket of
the power adapter.
3 After all connections are made, power up the display screen and connect the other
end of this power cord to a nearby mains outlet. Then power up the local module and
nallyswitchonthecomputer.Thiswillalloweachitem,inorder,tocorrectlydiscover
the one immediately downstream.
Note: Please pay close attention to
the power related items within the
Safety information section.