User guide
26
8 Click the ‘Browse’ button and locate the .bin upgrade file that you
downloaded earlier. Click the ‘Perform Upgrade’ button. The upgrade will
take place and its progress will be shown on screen.
9 When the upgrade is complete, click the link ‘Click here to reboot the unit
into normal operation’.
Performing a flash upgrade
AdderLink IP Gold is fully reconfigurable via flash upgrade and there are two
methods that you can use:
• Theremotemethod,or
• The ‘dip switch’ method.
The most streamlined upgrade procedure is the remote method because it is
carried out completely from a remote system. The ‘dip switch’ method is useful
because it can be carried out even if the firmware within the AdderLink IP Gold
unit has been corrupted.
Flash upgrade using the remote method
Using this method, the AdderLink IP Gold is upgraded via remote connection
(through the IP network port). Upgrades are digitally signed by Adder using
a secure key. This prevents unauthorised or altered firmware images being
downloaded into the unit.
To perform a flash upgrade using the remote method
1 Download the latest firmware revision for the AdderLink IP Gold from the
Adder website and decompress the download file. View the decompressed
files and make a note of the name and location of the .bin file that was part
of the download file collection.
2 Make a remote connection to the AdderLink IP Gold unit and login as the
admin user.
3 Once logged in, click the ‘Configure’ button in the top right corner of the
window.
4 Click the ‘Unit Configuration’ button.
5 Clickthe‘AdvancedUnitConguration’button.
6 Clickthe‘UpgradeFirmware’button.Adialogboxwillbedisplayed,notethe
IP address shown and click OK.
7 Theunitisnowreadytoaccepttheupgradeles.Openyourbrowserand
log into the AdderLink IP Gold using the IP address that was confirmed in
the dialog. Once connected, the unit will offer the following screen: