User guide

 




19
Resetting the configuration
The AdderLink IP Gold asks for an unknown admin password
This may occur if the AdderLink IP Gold has been previously configured. If the
existing admin password cannot be discovered, then your only recourse is to
perform a factory reset.
To invoke a configuration reset by switch
1 Remove power from the AdderLink IP Gold unit.
2 At the rear of the AdderLink IP Gold, adjacent to the power input socket,
click mini switch 1 to its ON (down) position.
3 Re-apply power to the AdderLink IP Gold. On the locally connected monitor
you should see a Maintenance menu:
AdderLink IP Gold Maintenance
Reset Configuration
return to normal operation.
Configure Network
Put option switch1upto
To upgrade unit, visit:
http://192.168.42.154
AdderLink IP Gold Reset Config
DO YOU WISH TO CONTINUE?
CancelRESET
WARNING: Continuing will cause
your existing configuration to
be erased.
The unit will then reset and
require re-configuring before
it can be used.
4 Select the ‘Reset configuration’ option.
A warning screen will be displayed. Select the RESET option and press .
5 Removepower,returntheminiswitch1toitsOFFpositionandthenre-
apply power. The locally connected monitor should display the first screen of
the initial configuration sequence.
The AdderLink IP Gold does not display the configuration sequence
If the AdderLink IP Gold has been previously configured it may not automatically
display the first of the setup screens. In this case you have two options, either:
• AccesstheUnit,NetworkandSerialconfiguration screens separately, or
• Resettheconguration:
To invoke a configuration reset by main menu
1 Using the locally connected keyboard and screen, log on as the admin user.
2 Select the ‘Configuration’ option.
AdderLink IP Gold Configuration
Reset Configuration
Back
Modem Configuration
Network Configuration
Unit Configuration
3 Highlight the ‘Reset configuration’ option and press .
A warning screen will be displayed, select the RESET option and press .
AdderLink IP Gold Reset Config
DO YOU WISH TO CONTINUE?
CancelRESET
WARNING: Continuing will cause
your existing configuration to
be erased.
The unit will then reset and
require re-configuring before
it can be used.
4 The AdderLink IP Gold will reset and then display the first of the four initial
configuration screens.