User guide

 


28

Products in the AdderLink AV200 range
The following items are available within the AdderLink AV200 product range:
•AdderLink AV200 pair (part number: ALAV200P)
OneAdderLinkAV200TtransmitterandoneAdderLinkAV200Rreceiver.
•AdderLink AV200 transmitter (part number: ALAV200T)
Single AdderLink AV200T transmitter.
•AdderLink AV200 receiver (part number: ALAV200R)
Single AdderLink AV200R receiver.
•AdderLink AV201 receiver (part number: ALAV201R)
Single AdderLink AV201R receiver.
•AdderLink AV204 transmitter (part number: ALAV204T)
Single AdderLink AV204T transmitter.
•AdderLink AV208 transmitter (part number: ALAV208T)
Single AdderLink AV208T transmitter.
•Replacement 5.3VDC power supply (part number: PSU-ALAV-IEC)
Oneauto-voltagesensingpowersupplywithcountryspecicIECcable
•Rack mount chassis (part number: ALAV-RMK-CHASSIS)
One19”chassisis3Uhighandcapableofaccommodatinguptosixteen
AdderLink AV transmitter or receiver modules.
•AV200/AV201 rack mount plate (part number: ALAV-RMK-FASCIA)
•AV204/AV208 rack mount plate (part number: ALAV-RMK-FASCIA2)
Cables
These cables are available for use when connecting the modules to systems and
peripherals:
•Video cable - 2 metres (part number: VSC18)
• Audiocable-3.5metres(partnumber:VSC22)
•Serial cable - 9 way male to 9 way female D-type, 2 metres
(part number: CAB-9M/9F-2M)
• SerialY-cable-9wayfemaleD-typesplittingtotwo9waymale
D-type connectors (part number: VSC19) - pinout shown below.
3
3
7
7
7
2
6
2
2
5
5
5
8
9
8
8
3
4
RX
RX
RTS
RTS
RTS
TX
DSR
TX
TX
GND
GND
GND
CTS
RI
CTS
CTS
RX
DTR
9way D-type
female
‘A’ connector
9way D-type
male
‘B’ connector
9way D-type
male
A
B
Y-cable pinout
Used to split serial communications between two
displays. For use only on AV200R or AV201R receivers
when linked to AV204T or AV208T transmitters.