User guide

 


22

Adjustments
The AV200R and AV201R receivers both include brightness and sharpness
adjustment dials. Additionally, the AV201R receiver is also equipped with two
extra dials to eliminate the effects of colour skew within the video image.
Brightness and sharpness adjustments
The brightness and sharpness adjustments
provided on every AV receiver allow you to
compensate for any losses incurred within
long cable links.
When making adjustments it is necessary
to have access to the AV receiver and to be
able to view one or both connected display
screens. Both adjustments, sharpness in
particular, are made easier when viewing high
contrast images with vertical edges, such as
black lines on a white background.
NOTE: Both video outputs are equally
affected by your brightness and/or sharpness
adjustments.
BRIGHT
SHARP
ADDERLINK
Sharpness dial
Brightness dial
High contrast
black character
on white
background
Black or bright
white shadow
on the right
indicates the need
for sharpness
adjustment
To display a suitable high contrast image
• Openawordprocessor,typethecapital
letter‘H’,or‘M’andincreasethepoint
size to 72 or higher. For best results, the
background should be white and the
character should be black.
•ABLACKshadowontherightof
thecharacterindicatesUNDER
compensation.
•AWHITEshadowontherightofthe
characterindicatesOVERcompensation.
To adjust brightness and/or sharpness
1 Carefully insert a small screwdriver into the dial labelled BRIGHT or SHARP, as
appropriate.
2 Slowly turn the dial clockwise or anticlockwise and observe the effect shown
on the screen. Withdraw the screwdriver when the displayed image is shown
at its optimum clarity.
3 Ifnecessary,repeatstep2fortheotherdial.
Note: If the sharpness control is set too high, the monitor may not be able
to display a picture. If this occurs, reduce the sharpness setting.