User guide

 


3

CATx LINK UP TO 300m
SERIAL
Y-CABLE
POWER
RECEIVER
200R
RECEIVER
200R
VIDEO
AUDIO
POWER
PC
RS232 SERIAL
TRANSMITTER
204T/208T
AdderLink AV204T and AV208T transmitters
The AdderLink AV204T transmitter provides four CATx outputs while the AV208T
provides eight CATx output to directly drive AV200R/AV201R receiver modules
located at distances up to 300m (1000 feet).
Note: An optional serial Y-cable is available (part number: VSC19), which allows a
connected receiver to provide a serial link to each display.
AdderLink AV204T/AV208T transmitter driving
up to four/eight remote receivers, in addition
to a local monitor and speaker set
Expansion via cascade links
In order to create small, medium and large digital signage networks, all
AV200 transmitters are designed to support additional transmitter modules
(and their subsequent multiple receivers). This is achieved using the video,
audio and serial out ports to provide the inputs into the next transmitter
module, and so on.
AV transmitters can be
connected in cascade to
provide further video,
audio and serial expansion
opportunities. Note that
the AV200T transmitter
does not support serial
cascade connections.
CASCADE LINK
CASCADE LINK
CATx LINKS TO RECEIVERS
CATx LINKS TO RECEIVERS
CASCADE LINK
CASCADE LINK
CASCADE LINK
CASCADE LINK
VIDEO
AUDIO
POWER
POWER
PC
Primary
Transmitter
RS232 SERIAL
TRANSMITTER
TRANSMITTER
204T/208T
204T/208T
Additional expansion is also possible by connecting further transmitter modules to
the original module in a cascade arrangement, each supporting their own multiple
AV200R/AV201R receiver modules - See Expansion via cascade links for details.
Note: The AV200T transmitter supports video and audio cascade
connections, however, the module does not include a serial out connector
and cannot support cascaded serial connections.
A limit of three cascade connections are possible between transmitter
modules. Using the corresponding maximum of four AV208T transmitters,
this gives an overall support for up to 64 remote displays on 32 separate
CATx branches.