User guide

 


19

Operation
In operation, the AdderLink AV modules are designed to be as transparent - high
quality video and audio signals from the source PC system are distributed to the
various display units and control signals are similarly routed back to the system.
Indicators
All AdderLink AV modules are equipped with two indicators to confirm
operation and, if necessary, assist with quick troubleshooting of potential
problems.
The indicators are located on one of the end panels, near to the LINK port and
operate as follows:
• GREEN When lit, indicates the presence of a video input into the module.
• RED Indicates the following states:
• Slow flash (once every second) AV204T and AV208T only - module
is in upgrade mode
• Continually lit - module is operating normally with its serial ports
enabled.
SECT 4
ADDE
R
®
TRANSMITTER
LINK
5 L
IN
K 6
LINK
7 LIN
K 8
LINK
1
PO
WE
R
LINK
2 L
IN
K 3
LINK
4
Indicator positions on
AV204T and AV208T units
Indicator positions on
AV200T, AV200R and
AV201R units