AdderView PRO User Guide COMPUTER KVM SPK USB1 USB2 { AV4PRO-DVI AV4PRO-DVI-DUAL AV4PRO-DVI-TRIPLE AV4PRO-DVI-QUAD MODE www.adder.
Configuration Using the configuration menu..................................................13 General configuration................................................................14 Changing hotkeys..................................................................14 Mouse switching....................................................................14 OPTIONS port speed..............................................................14 OPTIONS port channel control behaviour............................
1 2 Multiscreen versions The AdderView PRO range includes separate models to support one, two, three or four video heads per channel. Multiple switching The attached peripheral devices can be switched collectively to any computer system, or can be linked to separate systems to achieve multiple tasks in parallel. Multiple switching can be controlled from the onscreen menu or using the front panel buttons.
Emulated USB switching The issues with interpreting the complex USB data streams and recreating (or Emulating) the identity of attached USB devices were eventually solved, leading to the creation of the Emulated USB switch. A neat side effect of the technique used is that each computer can be fooled into thinking that the USB device is permanently connected to it, even when the device is switched to another computer.
AdderView PRO features - front and rear The AdderView PRO single screen and multiscreen units are housed within durable, metallic enclosures with all connectors situated at the rear panel. The smart front face features the control buttons and the operation indicators. Multiscreen versions M U L T I S C R E E N MODE COMPUTER KVM SPK V1 V2 MODE USB1 USB2 www.adder.com COMPUTER button Press to change to the next computer channel.
What’s in the box AdderView PRO Multiscreen units AV4PRO-DVI-DUAL, AV4PRO-DVI-TRIPLE or AV4PRO-DVI-QUAD Power adapter (12.5W or 20W) and country-specific power lead CD-ROM CO COM MPU PU TETE R R KV KMV M CO MPU TER V1 V1 USB1 V2 V2 KUS UB1S V3 V3 M BUS 1UB2 S V4 V4 B2 MO MDOE D U L T I S C R E E E N USB2 MO DE Four self-adhesive rubber feet ww ww w.a dder .com w.a dd er.
There are two main mounting methods: • The supplied four self-adhesive rubber feet • Optional rack brackets (AV4PRO-DVI models only) Rack brackets (AV4PRO-DVI models only) Connections The optional brackets (plus four screws), allow the unit to be secured within a standard rack slot. INDOOR USE ONLY Note: Both the AdderView PRO unit and its power supply generate heat when in operation and will become warm to the touch.
Connections The ports that make up the user console are where you attach the peripherals that will be shared between the computer systems. Ensure that power is disconnected from the unit. To connect peripherals to the user console 1 Position your peripheral devices in the vicinity of the unit such that their cables will easily reach. 2 Keyboard and mouse: Attach the leads from your USB keyboard and mouse to the USB sockets specifically labelled with keyboard and mouse symbols.
Computer systems From the USB port on the computer US 3 1 B1 2 B2 US B1 U SWSB2.0 ITC HE D 1 From the speaker port on the computer 4 Single screen units: Use a DVI cable or a VGA to DVI-I adapter cable (if using analogue signals) to link the video output of the computer’s graphic port to the DVI-I port of the required channel on the rear of the unit.
Power in connection Optional RC4 remote control The AdderView PRO unit is supplied with either a 12.5W (single screen version) or 20W (Multiscreen versions) power adapter. There is no on/off switch on the unit, so operation begins as soon as a power adapter is connected. To connect the power supply 1 Attach the output lead from the power adapter to the 5V socket on the rear panel of the unit.
10 OPTIONS 8p8c 10p10c Signal 1 2 3 4 5 6 7 8 Channel select input 1 5VDC power output (100mA max) GND reference for all signals RS232 (RXD) data receive RS232 auxiliary data transmit (reserved) RS232 auxiliary data receive (reserved) RS232 (TXD) data transmit Channel select input 2 Channel select input 3 Channel select input 4 1 2 3 4 5 6 7 8 9 10 To connect a computer or device for remote control 1 Insert the 8p8c or 10p10c connector of the cable to the OPTIONS port on the rear panel of the
Slave AdderView PRO 4 USER CONSOLE 3 2 1 USB 1 5V USB 2 2A USB2.0 SWITCHED OPTIONS 4 USER CONSOLE 3 2 1 USB 1 5V OPTIONS USB2.0 SWITCHED Master monitor Computers fitted with multiple video heads USB 2 2A Master AdderView PRO Slave monitor INDOOR USE ONLY Serial synchronisation cable INDOOR USE ONLY AdderView PRO units can be connected together so that they operate in a synchronised manner.
Managing EDID video display information You can refresh the EDID information from the connected monitor(s) without the need to power cycle the AdderView PRO. To refresh EDID information during use 1 Enter the Configuration menu.
1 Press and hold the front panel COMPUTER button for roughly five seconds. The display will show: 2 On the keyboard, press the letter key for the required menu section, e.g. The display will show the pressed letter, e.g. 3 Press the number of the required setting, e.g. The display will show the pressed number, e.g. 4 Press to accept the setting and return to the main menu section.
General configuration OPTIONS port speed You can determine how the OPTIONS port responds to channel control inputs. You can enable or disable mouse switching to suit your installation requirements. To enable/disable mouse switching 1 Enter the Configuration menu. 2 Press to enter the User Preferences menu and then press either: to Enable mouse switching to Disable mouse switching 3 Press to accept the setting and return to the main menu section.
Miscellaneous functions 4 Press and then to exit the menu and save changes. . 4 Press and then to exit the menu and save changes. To use the stored EDID information at the power up When you engage this mode, the unit will not interrogate the video display during startup and will instead use the data that are stored. To revert to interrogating the video display, use the F 2 function discussed above. 1 Enter the Configuration menu. 2 Press to enter the Functions menu 3 Press and then .
Performing upgrades To use the KVM Firmware Uploader utility 1 - Obtain and run the KVM Firmware Uploader. Download the latest AdderView PRO unit KVM Firmware Uploader from the Adder Technology website and install it on a Windows-based upgrade computer that will be connected to the AdderView PRO unit. The files are supplied as a compressed ZIP file. Decompress the ZIP file with an appropriate tool such as WinZip (www.winzip.
8 - Commence the upgrade To begin the upgrade process, click the Upload Now button. The progress will be shown within the dialog. Should you decide not to continue with the upload at any stage, click the Abort button; response to this is usually immediate, however, during an erase command, the upload will not be aborted until the erase is complete (this may take a few seconds). 9 - Cycle the power Disconnect the power. When the power is re-applied the AdderView PRO unit will operate using the new firmware.
Indicates the number of the currently selected computer Use this button to choose the next required computer COMPUTER The KVM, SPK, USB1, and USB2 indicators show which peripherals are switched to the current computer channel OR (as you begin pressing the MODE button) the peripherals that will be switched during the next press(es) of the COMPUTER button.
and (or other hotkeys, if altered). 2 While still holding and , press the number key of the required channel address (or the TAB key), then release all of the keys. Note: The numbers on your keyboard’s numeric keypad are not valid, use only the numeral keys above the QWERTY section. The ports (KVM, audio and/or USB) that are switched using this method depend upon the switching mode that is currently set using the front panel buttons.
To select a computer using the mouse buttons to choose Cycle only active ports 3 Press 4 Press to accept the setting and return to the main menu section. and then to exit the menu and save changes.
To lock access to the computers When privacy is required, you can lock access to the connected computers via the unit. To lock the unit 2 While still holding and , press . The display will show (providing a valid password has been previously set). You will not be able to access any computers until the password is correctly entered. To unlock the unit • When prompted, enter the correct password and press ������ . To set a new password 1 Enter the Configuration menu. .
Autoscanning on the keyboard. to accept the setting and return to the main menu section. 4 Press and then to exit the menu and save changes. Note: The setting of this option also affects which computers are visited when the channel is changed using the mouse buttons or hot key + tab. To select an autoscan period 1 Enter the Configuration menu.
Further information • Fax in the UK: in the US: 01954 780081 +1 888 275 1117 • Phone in the UK: in the US: 01954 780044 +1 888 932 3337 • Email – support@adder.com • Adder Technology website – www.adder.com Check the Support section of our website for the latest solutions and driver files.
VESA STD VESA STD VESA STD Native/preferred timing IBM VGA IBM XGA2 IBM VGA Apple Mac II VESA VESA VESA VESA VESA VESA Apple Mac II IBM VESA VESA VESA VESA Apple Mac II VESA STD VESA STD VESA STD 1024 x 768p at 60Hz 720 x 400p at 70Hz 720 x 400p at 88Hz 640 x 480p at 60Hz 640 x 480p at 67Hz 640 x 480p at 72Hz 640 x 480p at 75Hz 800 x 600p at 56Hz 800 x 600p at 60Hz 800 x 600p at 72Hz 800 x 600p at 75Hz 832 x 624p at 75Hz 1024 x 768i at 87
Appendix 2 – Cable pin-outs SLAVE end 8p8c connector TXD 6 2 RXD TXD 6 3 RXD RXD 3 3 TXD GND 2 2 GND GND 2 5 GND Serial remote control and flash upgrade cable (10p10c) 10p10c connector D-Type female 9 way Multi-head synchronisation cable (10p10c) MASTER end 10p10c connector SLAVE end 10p10c connector TXD 7 2 RXD TXD 7 4 RXD RXD 4 3 TXD GND 3 3 GND GND 3 5 GND MASTER end 8p8c connector D-Type female 9 way 8p8c conn
• For use in dry, oil free indoor environments only. • Both the AdderView PRO unit and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or place them locations where air cannot circulate to cool the equipment. Do not operate the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do not place the products in contact with equipment whose surface temperature exceeds 40 degrees Centigrade.
Radio Frequency Energy This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par le ministère des Communications du Canada.
Adder Asia Pacific 6 New Industrial Road, Hoe Huat Industrial Building #07-01, Singapore 536199 Tel: +65 6288 5767 Fax: +65 6284 1150 Adder Corporation, 350R Merrimac Street, Newburyport, MA 01950, United States of America Tel: +1-888-932-3337 Fax: +1-888-275-1117 Adder Technology Limited, Technology House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom Tel: +44 (0)1954 780044 Fax: +44 (0)1954 780081 © 2010 Adder Technology
A F M S V Assistance 22 Audio connection 7 Autoscanning 21 Firmware upgrade 15 Front panel switching 17 H Brackets fitting 6 Host computer connection 8 Hotkeys changing 14 selecting computers 18 what are they? 18 Operation 17 Options port 4 Safety information 25 Selecting computers with front panel 17 with hotkeys 18 with mouse buttons 19 Serial port settings for control 10 Speakers connection 7 Supplied items 5 Switching 17 Video modes 23 Video port connection 7 B Mounting 6 Mouse connection 7
