User guide

14









Switching more than two computers
In common with our professional switching products, you can expand
its use and switch more than two computers. This is called ‘cascading’
and is achieved by connecting the keyboard, video and mouse ports of
the AdderView Omega to one of the channels of another switching
product.
When you use our switches in this way, channel selection is performed
by an extended keyboard sequence.
4
3
2
1
For instance, to select channel two of your AdderView Omega when it
is connected to the fourth port of an AdderView GEM (a four port
switch), you would use the keyboard sequence:
1 then, while still holding
2 Release and press , then release all keys.
Note: Because the AdderView Omega does not use a power supply, it
must always be the last switching device in a cascade. For the same
reason, you cannot cascade two AdderView Omegas.