User guide

getting
started
welcome
rter
inormation
13
te
manager
te
connector
To search for a device
1 On the ADDER.NET Manager menu bar, place your mouse pointer over
Devices and then choose Search from the drop down list. The ‘Device
Search’ page will be displayed:
3 Choose the search logic that you wish to apply:
• IncludedevicesthatmeetANYofyoursearchcriteria,
• IncludedevicesthatmeetALLofyoursearchcriteria,
• ShowdevicesthatDON’Tmatchyoursearchcriteria.
4 When all search criteria are in place, click the Search button. After a short
delay the Device Search page will list all of the devices that match your
criteria.
5 Click the Manage button adjacent to the name of the required device to
view the Device Manager page.
Click to show a list
of all registered
devices.
2 As required, enter one or more search criteria for the device:
• Thenameofthedevice,
• Thedescriptionofthedevice,
• TheIPaddressofthedevice,
• TheIPPortnumberofthedevice,
• TheDeviceID,
• Thelocationofthedevice.
• TheStatusofthedevice,i.e.whetherithasorhasn’tyetbeenacquired.
Note: Any of these fields can use the ‘*’ wildcard character to give a wider
match.
Note:
*
can also be
used as a wildcard
character during
searches.