Datasheet

SPECIFICATION
ADDA CORPORATION Page 4/4
Model No.: AD1212HB-A70GL P.S:(T)
8.0 REMARKS
8.1 Material and construction are subject to change without
advance notice. The changes should be within specification.
8.2 All fans shall meet the quality inspection under sampling
plan MIL-STD-105E as follow:
Critical 0.25%
Major 1.00%
Minor 2.50%
9.0 OUTLINE STYLING & DIMENSIONS
LEAD WIRES : UL 1007, AWG24 , L = 280±10 mm
Red = positive ; Black = negative.
10.0 Notes:
10.1 Please do not touch and push Fan Blade with fingers or others,
fan blade and ball bearings may be damaged and it causes noise defect.
10.2 Do not carry the fan by its lead wires.
10.3 lf the fan does not have the polarity protection function, the connection of the
colored wires should be red + red, and black + black, or else the fan will be
damaged in no time.
10.4 For the models without reverse connection of polarity protection, please do not
connect the lead wire in reverse
10.5 Please don't install this fan in series with 2x voltage inputs. For example, if a single
fan rated at 12V, then don't install two of them in series with 24V input.
10.6.Every specific fan is designed for its certain application (project). Therefore, if you want to
use this fan in other application (project), please inform ADDA first so that we can confirm
whether there is any issue which might be incurred from the reason of this different
application (project) or not.
10.7 The"Life Expectancy" of this fan has not been evaluated for use in combination with any
end application. Therefore,the Life Expectancy in the Test Reports(L10 and MTTF Report)
that relate to this fan is for reference only and shall not construe any kind of warranty of
ADDA to the life of any specific fan,either expressed or implied.
10.8 The period of product warranty,unless otherwise agreed by ADDA in written,shall be 12 months
staring from the date of production.
研發處
2012.05.11
發行章