Owner's Manual
2021-Current Ford Bronco ADD Stealth Fighter ™
Rear Bumper Installation Instructions
Addictive Desert Designs® | Page 6
®
ADDICTIVE DESERT DESIGNSADDICTIVE DESERT DESIGNS®®
8. Aer the wiring harness has been transfered over, zip tie the harness to secure it in place, than insert the 4
provide nut tabs on the ADD Rock Fighter bumper in these locations. (Fig H)
Fig HFig H
2 on each side
9. Insert license plate light into license plate light cut out from the inside of the bumper. en push the light
into place from the outside of the bumper. (Fig I)
Insert light
from inside the
bumper
Press into place
from outside
Fig IFig I