Owner's Manual

2021-Current Ford Bronco ADD Stealth Fighter ™
Rear Bumper Installation Instructions
Addictive Desert Designs® | Page 3
®
ADDICTIVE DESERT DESIGNSADDICTIVE DESERT DESIGNS®®
3. ere are 2 bolts which are 15mm that are located behind the bumper towards the inside of the frame. Aer
those 2 bolts have been removed the bumper can be pulled o. (Fig C)
4. Aer the bumper is removed, take o the wiring harness by removing the sensor plugs and License plate
light. Squeeze the license plate light tabs on each end together and the light will come out. When transferring
over the license plate light (You will need to grind down the tab that faces the ADD bumper). (Fig D)
Fig CFig C
Fig DFig D
Grind tab on the opposite
side facing bumper