Owner's Manual

2021-Current Ford Bronco ADD Stealth Fighter ™
Rear Bumper Installation Instructions
Addictive Desert Designs® | Page 2
®
ADDICTIVE DESERT DESIGNSADDICTIVE DESERT DESIGNS®®
Removal:
1. Unplug the main bumper harness connectors located on both the driver and passenger side of the vehicle
along the frame rail. ere are 2 connectors in total located under the rear fenders. (Fig A)
2. Remove the 3 bolts with a 15mm wrench which will be found on each end of the bumper for a total of 6
bolts. (Fig B)
Fig AFig A
Fig BFig B