Datasheet

X2-10GB-LRM-AO
Cisco X2-LRM 10GB Module
1310nm, 220m, MMF, SC RoHS6
_______________________________________________________
Add-On Computer – 877-292-1701
Page 2 of 8
Supply Voltage APS Vaps 0 1.5 V
Static Discharge Voltage, All Pins2) STd 500 V
Average Receive Optical Power RxP max 1.5 dBm
Exceeding any one of these values may permanently destroy the device.
Electrical Characteristics
Recommended Operating Conditions
Values Unit
Parameter Symbol
min. typ.
max.
Operating Case Temperature
TC 0 70 °C
Transponder Total Power Consumption P 4 W
Supply Voltage +5.0 V VCC5 4.75 5 5.25 V
Supply Current +5.0 V ICC5 10 mA
Supply Voltage +3.3 V VCC3 3.14 3.3 3.47 V
Supply Current +3.3 V ICC3 830 mA
Supply Voltage APS VCC aps 1.152 1.2 1.248 V
Supply Current APS ICC aps 830 850 mA
.
Electrical DC Characteristics
(VCC5= 4.75 V to 5.25 V, VCC3= 3.14 V to 3.47 V, VCCaps= 1.152 V to 1.248 V, TC= 0°C to 70°C)
Values Unit
Parameter Symbol
min. typ. max.
1.2 V CMOS (1.8 V CMOS Compatible1)) I/O DC Characteristics (PRTAD; LASI; RESET;
TX_ONOFF)
External Pull-up Resistor for Open
Drain
Rpullup 10 22 k?
Output High Voltage2)
Voh 1 V
Output Low Voltage2)
Vol 0.15 V
Input High Voltage Vih 0.84 1.5 V
Input Low Voltage Vil 0.36 V
Input Pull-down Current3)
Ipd 20 120 µA
MDIO I/O DC Characteristics (MDIO; MDC)
Output Low Voltage5)
VOL –0.3 0.2 V
Output Low Current IOL 20 mA
Input High Voltage VIH 0.84 1.5 V
Input Low Voltage VIL –0.3 0.36 V