Datasheet

ManualsBrandsAdd-On Computer Peripherals (ACP) ManualsNetworkingX2-10GB-LRM-AO

X2-10GB-LRM-AO

Cisco X2-LRM 10GB Module

1310nm, 220m, MMF, SC RoHS6

_______________________________________________________

Add-On Computer – 877-292-1701

Page 1 of 8

Absolute Maximum Ratings

Parameter Symbol Min Max Unit

Storage Ambient Temperature1) TS -40 85 °C

Operating Case Temperature1) TC 0 70 °C

Supply Voltage +5.0 V V5 0 6 V

Supply Voltage +3.3 V V3 0 4 V

10G

MMF

10GBASE X2 Transceiver

Features

• Hot pluggable X2 MSA form factor

• Total power consumption: 4.0 W maximum

• RoHS-6 compliant (lead-free)

• Temperature range 0°C to 70°C

•

Transmission distance of 300m

•

Uncooled 1310nm directly modulated Fabry-Perot

laser

•

SC connector, multimode fiber

•

Full duplex transmission mode

•

Digital Optics Monitoring (DOM)

•

Power supply: +5.0 V, +3.3 V

•

Adaptable Power Supply (APS: +1.2 V)

•

XAUI electrical interface

4x 3.125 Gb/s Ethernet

4x 3.1875 Gb/s Fibre Channel

• Management and control via MDIO 2-wire bus

• 70-pin connector

• Separated signal/chassis ground

• Mid Pak module variance for front panel mounting

• De-latch mechanism with low extraction force

Summary of content (8 pages)

PAGE 1
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ X2-10G-MMF-AO 10GBASE X2 Transceiver Features • Hot pluggable X2 MSA form factor • Total power consumption: 4.
PAGE 2
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ Supply Voltage APS Static Discharge Voltage, All Pins2) Average Receive Optical Power Vaps STd RxP max 0 1.5 500 1.5 V V dBm Exceeding any one of these values may permanently destroy the device. Electrical Characteristics Recommended Operating Conditions Parameter Symbol Operating Case Temperature Transponder Total Power Consumption Supply Voltage +5.
PAGE 3
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ Pull-up Supply Voltage Input Capacitance Load Capacitance External Pull-up Resistance VPU CIN CLOAD RLOAD 0.84 1.2 1.5 10 V pF 470 pF ? 200 1) For 1.8 V CMOS Voh= 1.65 V min., Vol= 0.15 V max., Vih= 1.17 V min., Vil= 0.63 V max. 2) Rpull-up = 10 k? to 1.8 V. 3) Vin = 1.8 V. 4) AC coupled. 5) IOL = 100 µA Electrical AC Characteristics (VCC5 = 4.75 V to 5.25 V, VCC3 = 3.
PAGE 4
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ MDIO Data Hold Time tHOLD MDIO Data Setup Time tSU Delay from MDC Rising Edge to tDELAY MDIO Data Change ƒMAX MDC Clock Rate 1) 100 MHz to 2.5 GHz. 2) At crossing point. 3) Per IEEE Std 802.3ae. 4) At near-end, No pre-equalization, 1 UI = 320 ps. 10 ns 10 ns 300 ns 2.
PAGE 5
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ Fibre Channel 50 µm MMF 400 100 62.5 µm MMF 200 220 50 µm MMF 500 220 50 µm MMF 2000 220 Notes: 1) Operating range as defined by IEEE and Fibre Channel standards. Longer reach possible depending upon link implementation.
PAGE 6
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ Immunity: Against Electrostatic Discharge (ESD) to the Module Receptacle EN 61000-4-2 IEC 61000-4-2 Immunity: Against Radio Frequency Electromagnetic Field EN 61000-4-3 IEC 61000-4-3 Emission: FCC 47 CFR Part 15, Electromagnetic Interference Class B EN 55022 (EMI) Class B CISPR 22 Add-On Computer – 877-292-1701 Discharges ranging from ±2 kV to ±25 kV to the front end / face
PAGE 7
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ DOM Parameters Parameter Min. (2) Laser Bias Current Monitor Accuracy Transmit Power Monitor Accuracy (3) Receive Power Monitor Accuracy (3) Values typ. Unit Max -10 +10 % -3 3 dB -3 3 dB 1) 0 to 70°C case temperature. 2) 0 to 12.5 mA. 3) -8.2 dBm to +0.5 dBm. Parameter Symbol Values min.
PAGE 8
X2-10GB-LRM-AO Cisco X2-LRM 10GB Module 1310nm, 220m, MMF, SC RoHS6 _______________________________________________________ Contact Information Add-On Computer, Inc. is a leading supplier of Memory Upgrade, Network Transceivers and Network connectivity products to Channel Partners, Resellers and OEMs, with more than seventeen years of direct industry experience. Add-On Computer (ACP) has been the exclusive supplier to Ingram Micro's "Memory Upgrades" program for the past nine years.