Datasheet

Page 1 of 3

AO-GES-22-S

10/100/1000M Media Converter

Two Fiber Ports and Two UTP Ports

Features

! Supports 10/100/1000Base-T, 1000Base-X protocol

! Flow control for full duplex and half duplex

! Supports Fiber Port Trunking, Increasing Fiber Channel

Bandwidth and Supply Fiber Channel Redundancy

! Flow control for full duplex and half duplex

! Supports Ports Based VLANS and TAG Based VLANS

! In conformity to safety code of FCC and CE MARK

! Supports up to 10k byte JUMBO frame

Product Description

AddOn’s AO-GES-22-S is our two port fiber to two port UTP media converter. The media

converter is designed with a switch controller and buffer memory that connects two types

of media. The UTP port supports all 10/100/1000 Mbps RJ45 Half and Full Duplex

modules, and the SFP ports support only 1000Mbps and Full-Duplex modules. The AO-

GES-22-S provides reliable and cost effective to your networking needs.

Technical Parameters

Parameter

Standard Protocol

10/100/1000Base-T, 1000Base-X

Connector

Two UTP RJ-45 connector, Two SFP slots

Data Transfer Rate

RJ45 Port: 10Mbps, 100Mbps, 1000Mbps

SFP: 1000Mbps

Power Supply Parameter

220V (170-260V) AC, 50Hz or DC48V

Operation Mode

Full Duplex mode or half duplex mode

TP Cable

Cat5 UTP cable

Environmental Temperature

0°C-50°C

Relative Humidity

5%-90%

Dimensions

27mm x 123mm x 85mm

PAGE 1
AO-GES-22-S 10/100/1000M Media Converter Two Fiber Ports and Two UTP Ports Features § § § § § § § Supports 10/100/1000Base-T, 1000Base-X protocol Flow control for full duplex and half duplex Supports Fiber Port Trunking, Increasing Fiber Channel Bandwidth and Supply Fiber Channel Redundancy Flow control for full duplex and half duplex Supports Ports Based VLANS and TAG Based VLANS In conformity to safety code of FCC and CE MARK Supports up to 10k byte JUMBO frame Product Description AddOn’s AO-GES
PAGE 2
AO-GES-22-S 10/100/1000M Media Converter Two Fiber Ports and Two UTP Ports Front Panel of Media Converter LED Indicator Lamp Explanation LED Function 100 1000 Lit when TP1/TP2 speed is 100Mbps Lit when TP1/TP2 speed is 1000Mbps Lit when TP1/TP2 connection is good Blinks when TP1/TP2 data is transmitting Lit when SFP1 connection is good Blinks when SFP1 data is transmitting Lit when SFP2 connection is good Blinks when SFP2 data is transmitting Lit when +5V power is supplying the device Link/Act SFP1 SF
PAGE 3
AO-GES-22-S 10/100/1000M Media Converter Two Fiber Ports and Two UTP Ports 1000Base-LX-40 1000Base-LX-80 Connector type LC LC Fiber type Single-mode Single-mode Wavelength 1310nm 1550nm Max Distance 40km 80km Min TX PWR -5.0dBm -3.0dBm Max TX PWR 0dBm 0dBm Sensitivity <-25dBm <-25dBm Link Budget 20.0dBm 22.