User Manual

June 2017

3. Switch both the power and heat switches to the ON position. The switches will light up when on.

4. Pre-heat for 15 minutes before use.

5. Add the ﬂ oss sugar (sold separately) directly into the well in the heating head using the provided

ﬂ oss scoop. Do not overﬁ ll.

6. Cotton candy will begin to spin around the bowl as the heater head continues to operate. As the

cotton candy accumulates, it will build up and shoot out through the top of the spinner head.

NOTE: To prevent overheating of this unit, please allow it to cool down for at least 15 minutes after

an hour of continuos use.

CLEANING & MAINTENANCE

NOTE: To maintain cleanliness and increase service life, this item should be cleaned daily. Do not

immerse the unit in water or any other liquid. If liquid enters the electrical compartment it may cause

a short circuit or electrical shock

1. Turn off all switches on the unit and unplug the unit to let cool down.

2. Allow the heating head to cool fully before cleaning.

3. Clean the base and stainless steel bowl with a wet towel only.

NOTE: Keeping the heating head clean is important for proper food safety and will help ensure a

longer life for your unit.

NOTE: Using a Bubble Shield on top of your cotton candy unit while in use will help reduce airborne

debris and loss of product. Bubble Shield (COT-21/C) is sold separately.

TROUBLESHOOTING:

Problem Cause Solution

Machine is not turning on Not plugged in Check the power cord and plug in

Broken micro switch Check the bowl and micro switch.

If connected and still not working

replace micro switch

Heating head is not working Broken motor Replace the motor

Belt disconnected Replace the belt

Machine isn’t heating Heating element broken Replace the heating element

Thermostat Replace the thermostat