INSTRUCTION MANUAL COT-21 COTND-21 Cotton Candy Machines This manual contains important information regarding your Adcraft unit. Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty.
WARNINGS • Do not touch any hot surfaces • Plug only into a 3-hole grounded electrical outlet of the appropriate voltage • Do not immerse unit, cord or plug in liquid at any time • Unplug cord from outlet when not in use and before cleaning • Do not operate unattended • Do not use this unit for anything other than intended use • Do not use outdoors • Always use on a firm, dry and level surface • Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been damaged in an
. Switch both the power and heat switches to the ON position. The switches will light up when on. 4. Pre-heat for 15 minutes before use. 5. Add the floss sugar (sold separately) directly into the well in the heating head using the provided floss scoop. Do not overfill. 6. Cotton candy will begin to spin around the bowl as the heater head continues to operate. As the cotton candy accumulates, it will build up and shoot out through the top of the spinner head.
Wiring Diagram for the Cotton Candy Machines FU - Fuse, 15A, 120V M - Motor, 80W/60Hz K1 - Power Switch SQ - Micro Switch JD - Heating Head R - Heating Piece - 120V, 1000W K2 - Heating Pipe Switch V - Voltage Meter FR1 - Temperature Controller FR2 - Thermostat June 2017
ACE Equipment One Year Limited Warranty Admiral Craft Equipment Corp. (ACE) warrants its equipment against defects in materials and workmanship, subject to the following conditions: ACE Equipment is warranted for one year, effective from the date of purchase by the original owner. A copy of the original receipt or other proof of purchase is required to obtain warranty coverage. This warranty applies to the original owner only, and is not assignable.
