Owner's Manual



1) While the bolt carrier is charged forward, pull the forward charging handle 90 degrees in relation to the
firearm. (Photograph 1)
2) Using a punch, tip of a FMJ cartridge or firing pin, depress the forward charging handle retaining pin.
Grasp and pull the pin out from the other side until it snaps into a locking position.
(Photograph 1)
3) Use the charging handle and the pin to pull the charging handle back towards the upper receiver of
the firearm. (Photograph 2)
4) Lock the bolt carrier back so the charging handle base has clearance and can be removed from
the rail.
5) Flip the charging handle over to the opposite side of the rifle 180 degrees ( making sure the handle is
facing towards the front of the firearm). (Photographs 3 & 4)
6) Slide the inserted charging handle forward until it reaches the front of the rail.
7) Release the bolt carrier forward into battery.
8) Press retaining pin back into place until it is in a locked position.
1 2 3 4
14 15
1. TEE BAR
2. FORWARD CHARGING HANDLE
3. PIVOT SPRING
4. RETAINING PIN
5. SPRING
6. RETAINING PIN PLUNGER
7. SPRING PIN
8. SPRING PIN
9. RETAINING PIN SPRING
10. BASE ASSEMBLY