Owner's Manual

34 35


MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION
Double Feed Dirty Magazine Clean Magazine
Round Will Not Chamber Dirty or Corroded Ammunition Clean or Replace Ammunition
Damaged Ammunition Replace Ammunition
Carbon in Chamber Clean Chamber
Bolt Will Not Lock Dirt, Corrosion, or Carbon in
Barrel or Bolt Locking Lugs
Clean Bolt Locking Lugs
Bolt Will Not Extract Round Frozen Extractor Remove Bolt and Clean Extractor
Restricted Buffer Assembly Clean Buffer and Spring
Restricted Movement of
Bolt Carrier Group
Remove, Clean, and Lubricate Bolt
Dirty or Corroded Ammunition Clean or Replace Ammunition
Dirty Chamber Clean Chamber
Cartridge Stuck
Push Cartridge Out
With Cleaning Rod
MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION
Short Recoil Carbon or Dirt in
Piston Assembly
Low Gas Pressure
Clean Piston Assembly
Adjust Gas Regulating Plug
Bolt Fails to Lock
After Last Round
Dirty or Corroded Bolt Latch
Low Gas Pressure
Clean Bolt Latch
Adjust Gas Regulating Plug
Faulty Magazine Replace Magazine
Selector Lever Binds Overly Dry Selector Lever Lubricate Selector Lever
Dirt or Sand Under Trigger Clean Trigger Assembly
Bolt Carrier Hung Up
Round Jammed Between Bolt
and Upper Receiver and/or
Double Feed
****Caution, Bolt May Slam Forward
When Removing Rounds ****
Remove Magazine, Remove Rounds.
If rounds cannot be removed, secure
and take to Gunsmith.

