User guide

50
addVANTAGE Pro 6.2 User Guide CHAPTER 5
Properties for Extensions and Crops
Properties for Extensions and Crops
Some extensions and crops must be configured. To display the properties
(Figure 57), highlight the extension or crop in the Explorer and click the
Properties icon.
Figure 57. Statistics Extension Properties Dialog, General Tab
Common Properties
Figure 57 shows the properties specific to the Statistics calculation extension.
The General tab displays general information about the extension/crop, and for
calculation extensions and disease models, allows you to enable or disable
individual extensions. If you look closely at the extension’s icon, you can tell
whether the extension is enabled or disabled.
The Action and Security tabs are discussed in Chapter 3, beginning on page 19
Properties for Crops
Three additional tabs pertain to crops.
The green triangle
in the bottom left
corner indicates
the extension is
enabled.
The gray square
in the bottom left
corner indicates
the extension is
disabled.
If an extension is being executed, the green triangle appears to move
across the bottom of the icon.