User manual

A511 User Manual, Rev. 1.1 - 12 - 08/2007
What do the various screens show?
The following Figures will show you the various screens of the SDI-12 Address Change Mode.
(Please note that values and settings are variable!)
• SDI-12 Address Change screen
Change and commit the new address by pushing the “F1”, “F2” and “F3” keys as
outlined above.
Figure 8: SDI address changer
• SDI-12 Error Message screen
Will show if an error occurred during the transaction with the sensor. This is the case
if the sensor is reacting too slowly to the commands issued by the A511 or if an
address is committed which the sensor does not support.
Figure 9: SDI-12 Error Message screen