User's Manual

30
There are four types of possible manipulation:
" Read/Write on the Registers: Select the "ATSxxx" option in the "Available
Commands", then select the required register clicking on it in the "Registers List".
• If you want to read
a register, click now on the "Read" button. The "Syntax"
window will display the sent command while the "Radio Module Response"
window will display the B900SS response.
• If you want to write
in a register, indicate the value that you want to give to
this register in the "Register Value" window, then click on the "Write"
Button. The "Syntax" window will display the sent command while the
"Radio Module Response" window will display the B900SS response.
" Read the Firmware Version: Select the "AT/V" option in the "Available
Commands", then click on the "Read" button. The "Syntax" window will display
the sent command while the "Radio Module Response" will display the B900SS
response.
" Read the Status Information: Select the "AT/S" option in the "Available
Commands", then click on the "Read" button. The "Syntax" window will display
the sent command while the "Radio Module Response" window will display the
B900SS response.
" Registers Reset to the default value: Select the "ATR" option in the "Available
Commands", then click on the "Read" button. The "Syntax" window will display
the sent command while the "Radio Module Response" will display the B900SS
response.