Technical Manual
Table Of Contents
- 1. Introduction
- 2. Hardware
- 3. The A431 Radio Module
- 3.1. About the A431 Radio Module
- 3.2. Functional description
- 3.3. Manufacturing Issues
- 3.3.1. Marking and labeling issues
- 3.3.2. Alignment Range and Switching Range
- 3.3.3. Tuning Procedure
- 3.3.4. Setting Up the Default Parameters
- 3.3.5. Definitions
- 3.3.6. Test Equipment Settings
- 3.3.7. Trimming Elements
- 3.3.8. Adjusting the Receiver Front End
- 3.3.9. Adjusting the VCOs
- 3.3.10. Adjusting the Crystal Reference
- 3.3.11. Checking the Receiver Parameters
- 3.3.12. Checking the Transmitter Parameters
- 3.3.13. Data Transfer Check
- 3.4. PCB Parts Placement
- 3.6. Frequency Reference Specifications
- 3.7. A431 Module’s Photographs
- 4. Software
8
Introduction
• Hardware: includes the schematics as well as a description of the main board
and interface boards of the A733
• The A431 radio module: includes the schematics and description of the radio
module
• Software: a short description of the software with the most important com-
mands that can be used to control the unit over the serial interface
This manual is intended for the radio approval authorities and laboratories.