Technical Manual
Table Of Contents
- Wireless Sensor Interface A720 (addIT™)
- 1. About the A720
- 2. Hardware
- 4. Software
- 4.1. AMOS
- 4.2. Mode Check
- 4.3. A/D Task
- 4.4. The Terminal Task
- 4.5. The Radio Interface Task
- 4.5.1. Digital Squelch
- 4.5.2. Modulation Technique Used
- 4.5.3. Generic Format of a Radio Frame
- 4.5.4. Data Frames
- 4.5.5. Frame Types
- 4.5.5.1. Request
- 4.5.5.2. Broadcast Answer
- 4.5.5.3. Set I/O Request
- 4.5.5.4. Read I/O Answer
- 4.5.5.5. Broadcast Request
- 4.5.5.6. Ping
- 4.5.5.7. Pong
- 4.5.5.8. Memory Dump Request
- 4.5.5.9. Memory Dump Answer
- 4.5.5.10. Data
- 4.5.5.11. Set ID
- 4.5.5.12. Set Slot Time and Sample Rate
- 4.5.5.13. Set Frequency
- 4.5.5.14. Set Battery Charge Levels
- 4.5.5.15. Set Pulse Counters Parameters
- 4.5.5.16. General Acknowledge
Proprietary Notice:
The Adcon logo, the A730 series, addIT™, addVANTAGE and
AgroExpert™ are trademarks or registered trademarks of Adcon Telemetry
GmbH. All other registered names used throughout this publication are
trademarks of their respective owners.
This publication contains confidential information property of Adcon
Telemetry GmbH. Disclosure to third parties of the information contained
herein is prohibited. Neither the whole nor any part of the information
contained in this publication may be reproduced in any material form
except with the prior written permission of Adcon Telemetry GmbH.
Release 1.0, October 1998
Copyright ©1998 by Adcon Telemetry GmbH.
All rights reserved.