Datasheet

DocID8349 Rev 7 159/170
ST7LITE20F2 ST7LITE25F2 ST7LITE29F2 Device configuration
169
Table 98. ST7LITE2 FASTROM microcontroller option list
Note: Not all configurations are available. See Table 96 for authorized option byte combinations.
Customer
Address
Contact
Phone N
o
Reference/FASTROM code (assigned by STMicroelectronics)
FASTROM code must be sent in .S19 format. .Hex extension cannot be processed.
Device Type/Memory Size/Package (check only one option):
Note: Addresses 1000h, 1001h, FFDEh and FFDFh are reserved areas for ST to program
RCCR0 and RCCR1 (see Section 7.1: Internal RC oscillator adjustment).
Conditioning (do not specify for DIP package)
[ ] Tape & Reel[ ] Tube
Special marking: [ ] No [ ] Yes "_ _ _ _ _ _ _ _ "
Authorized characters are letters, digits, '.', '-', '/' and spaces only.
Maximum character count:
DIP20/S020 (8 char. max) : _ _ _ _ _ _ _ _
Watchdog Selection:[ ] Software Activation[ ] Hardware Activation
Watchdog Reset on HALT:[ ] Reset[ ] No Reset
LVD Reset[ ] Disabled[ ] Enabled
[ ] Highest threshold
[ ] Medium threshold
[ ] Lowest threshold
Sector 0 size:[ ] 0.5K[ ] 1K [ ] 2K[ ] 4K
Read-out Protection:[ ] Disabled[ ] Enabled
FLASH write Protection:[ ] Disabled[ ] Enabled
Clock Source Selection:[ ] Resonator:
[ ] VLP: Very Low power resonator (32 to 100 kHz)
[ ] LP: Low power resonator (1 to 2 MHz)
[ ] MP: Medium power resonator (2 to 4 MHz)
[ ] MS: Medium speed resonator (4 to 8 MHz)
[ ] HS: High speed resonator (8 to 16 MHz)
[ ] External Clock:
[ ] On OSC1
FASTROM device 8K
SO20: [ ] ST7PLITE20F2M6
[ ] ST7PLITE25F2M6
[ ] ST7PLITE29F2M6
[ ] ST7FLITE29F2M7
DIP20: [ ] ST7PLITE20F2B6
[ ] ST7PLITE25F2B6
[ ] ST7PLITE29F2B6