User guide

FPGA CODE
5-2 EV10AQ190x-DK - User Guide
1067BX–BDC–12/11
e2v semiconductors SAS 2011
5.3 FPGA
Programming
Connect the USB Mini cable on USB JTAG connector J22
Change the Configuration Mode Switch and System ACE Address
Figure 5-2. Configuration Mode Switch of ML 605 Board
Launch the iMPACT of ISE suite and load the CDROM\FPGA bin\bin\prog_q10.ipf
Figure 5-3. Loading of DKQUAD10bit.ipf file
Note: ensure that program into PROM is correctly programmed.
Don't forget to program the CDROM\FPGA Bin\progQ10_V1.1.mcs file into PROM.