User guide

Software Tools
EV10AQ190x-DK - User Guide 4-35
1067BX–BDC–12/11
4.5.9 Data Save File It is also possible to save the data of your acquisition (saving of all data samples and
FFT result). This data is stored into an Excel file with different sheet:
 Sample signal: Data of Quad 10-bit ADC with channel A B C D in this order in
columns
 INL curve of channel A B C D in this order in columns
 FTT parameters (SFDR, THD, SNR, SINAD, EBOB) of each Channel A B C D in line
 Harmonic level of each channel A B C D in columns
 FFT Module and FFT frequency of each Channel A B C D in columns
File: DK BDC QUAD10bit DATA.xls
Figure 4-60. Example of Excel File
Column A: corresponds to channel A
Column B: corresponds to channel B
Column C: corresponds to channel C
Column D: corresponds to channel D
Warning: before using, your PC needs to be configured. The decimal separator
must be a dot "." instead of comma "," like in French.
Use a control Regional Setting to check if decimal separator is configured with a
dot ".".