User guide

Software Tools
EV10AQ190x-DK - User Guide 4-13
1067BX–BDC–12/11
4.5 Operating Modes The Quad 10-bit ADC software included with the Demo Kit provides a Graphical User
Interface to configure the ADC.
Push buttons, popup menus and capture windows allows easy:
1. Settings;
2. Test;
3. Gain / Offset / Phase;
4. Input Impedance;
5. Clock;
6. Power;
7. Acquisition;
With Setting, Test, Clock and Acquisition windows always click on "APPLY" button to
validate any command.
Clicking the "CANCEL" button will restore last settings sent with "APPLY" button.
Figure 4-20. APPLY / CANCEL Buttons
With Gain/Offset/Phase and INL windows always click on "Write" then "Send" buttons to
validate any command.
Figure 4-21. Write / Send / Cancel Buttons
The Reset button allows re-configuring ADC to the Default Mode.
Figure 4-22. Hardware Reset Button
This user interface could be reduced using "Hide Tab", below.
Figure 4-23. Hide Tab Button