Technical information

C:
\
UFFICIO TECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
7
MS 500-1000-2400-2500
ISOIL
ISOIL
LONG PIPE
Install the sensor away
from curves and hydraulic
accessories
During the functioning the
pipe must be completely
full of liquid, or completely
empty
For vertical installations is
preferable an ascending
flow
For installations on long
pipe line, please use the
anti vibration joints
Before tightening the nuts
approach as more possible
the flange of the piping to
the flange of the sensor
Avoid the installation near
curves or hydraulic
accessories.
Avoid the functioning with
the pipe partially empty.
For vertical installations
with descending flow
direction contact the
manufacturer
Avoid the installation of
the sensor in a long pipe
line, without any support
of the same.
Avoid the approach of the
flange and counter flange
using the closing force of
the nuts.
TO MAKE
TO AVOID
ISOIL
ISOIL
ISOIL
ISOIL
ISOIL
ISOIL
3 ND
2 ND
ISOIL
ANTI VIBRATION JOINTS
LONG PIPES
ISOIL
THICKNESS GASKET + 4mm