Technical information

C:
\
UFFICIO T
ECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
68
TRASFORMATION CONVERTER FROM SEPARATE VERSION TO
COMPACT VERSION
Cover
Fixing screw
Fixing plate
O-Ring 2056
O-Ring
Grower Ø 6
Nut Ø 6
SENSORE
SENSORE
- Remove the connector - loosen the cable gland and remove the cable from connection box cable gland
- Insert the connector of compact version nei connettori femmina (polarized connector) - Remove the cable gland
- Insert the corcks PG 9 inclusive in the kit and tighten the corks with the appropriate nuts
cover of connector box
Wall bracket
- Disconnect the cables from terminal - Remove the cable from the converter
- Unscrew the fixing flie - Unscrew the fixing screw
Fixing flie
- Uncrew the nut and unthread the fixing plate of separate version
- Assemble the fixing plate of compact version like visualized in pic. 1
- Remuve the cover of separate version
- Insert the cable in the hole of box converter
- Assemble the box converter to connector box - Tighten the fixing screw
Fixing screw
1
2
3
4
5
N.B.:
For the connections of cables to the converter see section: "Electrical connections" of operative manual
SENSORE
CONVERTITORI
ML 190 ML 200 ML 201 ML 202
SENSORI
MS 500
MS 1000 MS 2400 MS 2500
MS 3700 MS 3770
Rear converter
IT019
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20