Technical information

C:
\
UFFICIO T
ECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
56
(POS. 43) Choice of the function and the range of current output n.2 [OUTmA2= X÷XX ±]
Choice of the function and the range of current output N.2. Please, refer to the previous function for the possible
choices.
The current output N.2 is optional and it is mounted on the optional module.
MENU 7.COMMUNICATION
(POS. 44) Network address set [ADDRESS= XXX]
Network address set. The address is to identify the instrument when connected via serial interface. The allowed values
are from 0 to 255.
(POS. 45) RS485 serial interface communication speed [SPEED1= XXXXX]
Serial interface communication speed for the RS485 output. This parameter may be set at one of the following values:
2400, 9600, 19200 and 38400 bps.
(POS. 46) RS232 serial interface communication speed / programming [SPEED2= XXXXX]
Serial interface communication speed for the RS232 output. This parameter may be set at one of the following values::
2400, 9600, 19200 and 38400 bps.
The RS232 port is optional and it is mounted on an optional module.
(POS.47) Print function enable [PRINT= ON/OFF]
Print function enable. The print functions allow the automatic print once every programmed interval of the process
data (flow rate, volumes, alarms, batch quantities, date and time). The printing may be got also manually on
operator’s request. This function is enable with out RS 232.
N.B.: for information on the protocols communications, refer to MI 200 manual.