Technical information

C:
\
UFFICIO TECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
5
SAFETY
Dangerous voltage, terminals identified by this symbol are subject to variable voltages that
may exceed 60Vdc and cause electric shock: connecting terminal 12-13 pag. 21, 60Vdc max,
250
V max during coil’s magnetic field commutation phase.
LEGEND
-
Before using the instrument, always make a sure connection to ground (see examples on pag.22
-
23)
- Verify that the mains voltage is the same written on the tag plate of the converter
- Pay attention not to connect the power supply to the outputs or the other terminals of M1/M2
- When the electric connections are completed, close carefully the instruments rear cover
- Avoid to open the instrument’s rear cover when the power is on.
- Avoid any attempt to repair the instrument. If the instrument is not functioning properly, please call
the nearest assistance service.
Dangerous voltage, may cause severe electric shock
General warning
Precautions