Technical information

C:
\
UFFICIO TECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
33
ACCESS CODES
The information of this manual are related to all the functions available with L2 security level.
All the functions available through access codes of higher level are protected and reserved to the service.
Access code description: L2 (menu “11 Internal Data, page 59 pos. 59)
A) with code L2 = 11111
(with this code only) you access the “Quick start menu”, and you can follow the programming
procedure as described on page 28
B) with code L2 = 22222 (with this code only) yo
u disable the request of code L2 and you can proceed with the programming
without entering any access code (up to L2 security level)
NOTE: the availability of the functions is related to the selected block (see page 34)
C) * with L2 customised (freely chosen by the user) you can proceed programming all the functions up to L2 security level,
entering its code whenever you enter the Main menu
*ATTENTION: take note very carefully of the customised code you have chosen, since there is no way for the user to
retrieve it is
forgotten