Technical information

C:
\
UFFICIO TECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
32
MANUFACTURER PRE
-
SETTINGS
The converter is programmed and delivered according
to the following STANDARD configuration:
?? Dip switch: ON (Switch positioned close to the lock symbol)
?? Security level: 3 (page 59 pos. 60)
?? Access code L” = 11111 (page 59 pos. 59)
With such a pre-setting, when powered on, the instrument will show one of the 4 visualisation pages (pict. A-B-C-D on pages 30-
31). By pressing the button you can get to the “Quick start menu”:
The “Quick start menu” may be set without entering any access code (see example 1 on page 35).
To enter the Main Menu, positio
n the cursor on the word “Main menu” and press the button ; then enter the level 2 access
code L” = 11111 and press the key .
All the functions of the converter are now available, apart those reserved to the service (access code of higher level).
the visualisation page shown aside may
contain different parameters
from those shown on your instrument,
depending on the pre-setting
required by the customer
Cover
Power supply
REAR CONVERTER
Dip switch