Technical information

C:
\
UFFICIO TECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
29
ACCESS TO THE INSTRUMENT
The ML 200 programming keyboard is made up by three keys:
SHORT PRESSING (< 1 SECOND):
It increases the numeric figure or the parameter selected by the cursor
It goes to the previous subject on the menu
batch start/stop (when enabled)
LONG PRESSING (> 1 SECOND):
It decreases the numeric figure or the parameter selected by the cursor
It goes to the next subject on the menu
SHORT PRESSING (< 1 SECOND):
It moves the cursor rightward on the input field
It goes to the following subject of the menu
It change the display of the process data
LONG PRESSING (> 1 SECOND):
It moves the cursor leftward on the input field
It goes to the previous subject on the menu
S
HORT PRESSING (< 1 SECOND):
It enter /leaves the selected function
It enables the main menu for the intrument configuration
It cancels the selected function under progress
LONG PRESSING (> 1 SECOND):
It leaves the current menu
It enables the totalizer reset request (when enabled)
It confirms the selected function
KEY BOARD