Technical information

C:
\
UFFICIO TECNICO
\
MANUALI
\
ML2
00
\
ML200 INGLESE
\
28
WIRING TERMINAL M2 WITH MODULE:
OUT 3 RS232 OUT 3 OUT4
E C CTS RD TD SG NO NC C NO NC C
21 22 23 24 25 26 21 22 23 24 25 26
27 28 29 30 31 32 27 28 29 30 31 32
SC SC
4..20mA OUT 4
LEGEND:
SC: Cable shield, electrically connected to ground and to the casing
CTS: Input terminal of the signal “CLEAR TO SEND” of the RS232 port
RD: Input terminal of the signal “RECEIVE DATA” RS232 port
TD: Output terminal of the signal “TRASMIT DATA” of the RS 232 port
SG: Terminal “SIGNAL GROUND” common to all signals of the RS232 port
C: Terminal conncted with the MANIFOLD of the transistor of the on/off
output
LEGEND:
SC: Cable shield, electrically connected to ground
and to the casing
C: relay - common
NC: Normaly closed contact
NO: Normaly open contact
ME200: 2 programmable on/off outputs
ME201: 1 programmable on/off output + 1 high frequency output
ME202: 1 0/4…20mA output + 2 programmable on/off output
ME203: 1 RS232 port + 2 programmable on/off outputs
ME204: 1 RS232 port + 2 programmable on/off outputs + 1 0/4…20mA outpu
ME220: see the manual
ME205: 2 relay outputs with 1 NO contact + 1 NC contact each,
2A 60Vac, 60W/125Va
ME207: 2 relay outputs with 1 NO contact + 1 NC contact each,
2A 250Vac, 60W/125Va
* The module name is visualized at the start of converter.
E
C
-
+