www.greenlee.com COMMUNICATIONS Greenlee Communications offers industry-leading tools for datacom, telecom, and fiber optic applications. Choose from a large lineup of premium installation tools, tone generators, fiber optic equipment, and more – all field tested to perform.
COMMUNICATIONs Hand TOOLS Telecom Splice Crimpers • Side cutter for AWG 19-26 copper. • Non-slip grips for precision control. • Crimp capacity – UR: AWG 19-26 – UY: AWG 22-26 – UG: AWG 19-26 PA1180 only • Stripping cavity for AWG 22 wire. • Needle-nose with knurled surface for gripping, wrapping and looping. PA1180 Cat. No. PA1180 PA1178 Description 4-in-1 Telecom Splice Crimper Telecom Splice Crimper PA1178 Round Cable Cutters • • • • PA1175 Cuts solid or stranded cable up to AWG 6.
= new product = Replacement Part = Accessory B = Bare tool Cable Splicer’s Knife and Splicer's Snips • • • • • PT-K01A Cuts cable, telephone wire and strips insulation. Tough, tempered steel knife blade holds its edge longer. Full-sized knife handle provides greater comfort. Knife has a short, coping-type blade made of the finest cutlery steel. Scissors have an upper blade with two stripping notches to strip most insulations from 19-24 AWG. Cat. No. UPC No.
COMMUNICATIONs Pro Wire Strippers • Strips both solid and stranded wires. • Precision ground blades ensure consistent stripping and cutting. • Ergonomically designed, extra long handles for superior comfort and assured grip. • Heat treated for strength with black oxide finish for rust resistance. • Serrated nose pliers for bending, pulling, and shaping wire. • Lock tab protects cutting edges during storage. • Cleanly cuts #6-32 and #8-32 screws. • Note: this is not an insulated tool.
= new product = Replacement Part = Accessory B = Bare tool stripax® Pro 6 & Pro 16 • Strips heavy-duty and industrial insulations including THHN & THHW. • Strips standard insulations including PVC, rubber and silicone. • Provides nick-free stripping of insulation with no damage to conductors. • Built-in cutter provides a smooth, straight cut without distorting the conductor. • Fine adjustment slider on top of tool lets you adjust to the insulation thickness.
COMMUNICATIONs Combo UTP/Coax SureStrip™ • Professional all-in-one cutter/stripper for coaxial and twisted pair cables. • Cuts and strips multiple cable types: – Coax: RG6, RG6 Quad and RG59. – Twisted Pair (UTP/STP): Cat6, Cat5e and Cat5. • Easy-to-use combination cutter/stripper. • Adjustable stripping blade for UTP/STP; accommodates different insulation thicknesses without damaging conductors. • Self-regulating cassette blade prevents nicks.
= Replacement Part = new product = Accessory B = Bare tool CST vario Stripper • • • • • • • PA3242 Most flexible coax stripping tool on the market. Easy to set up and adjust. Two- and three-level stripping. Minimum center-to-center strip length is 0.13” (3.2 mm). Maximum total strip length is 0.67” (17 mm). Adjustable blade positioning in 0.04” (1 mm) increments. Lifetime warranty on frame only. *Not recommended for use on LMR or Teflon cables. Cat. No.
COMMUNICATIONs CST Pro Coax Stripper • New patent-pending coax stripping system for precision & accuracy • Works with a wide range of cable diameters from .1”-.315” (2.5-8.0mm) including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281 and mini-coax. • Pre-set for standard 2- and 3-level strip lengths • Coax stripper designed for pros requiring precision, versatility & ease of use. • Reversible-rollers easily adjust for various cable sizes including mini-coax.
= new product = Replacement Part = Accessory B = Bare tool Kwik Stripper Twisted Pair Stripper • No tool is better for trimming the jacket from twisted pair cable without damaging the individual conductors. • Blade depth adjustment ensures precise cutting depth. • Blade penetration controlled by tension loop. • Strip length gauge. Cat. No. 45579 UPC No.
COMMUNICATIONs AM 25 Slitter • • • • • • • • Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables. Adjustable cutting depth. Swivel blade for circular, longitudinal and spiral cuts. Spare blade in handle. Cable holding clip with integrated edge for removing slit insulation. Laser-trimmed, stainless-steel blade for long use. Slits PVC, Teflon and THHN. Perfect for armored cable. NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations Cat. No.
= new product = Replacement Part = Accessory B = Bare tool Pocket Cable Stripper • Specifically designed for stripping power and telecommunications cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm). • Strips solid conductor, stranded conductor and multiple conductor cables. • Easy blade depth adjustment. • Blade rotates for circular, longitudinal and spiral cuts. cat. no. 1903 13544 13545 13546 upc no.
COMMUNICATIONs RG59/RG6/RG6 Quad Flaring Tool • Works on RG59 and RG6/6 Quad cable. • Flares shield away from center dielectric. • Saves time on CATV and satellite installation Cat. No. Description PA1917 RG59/6/6QS flaring tool BNC and CATV “F” Extraction Tools • Chrome finish. • Comfortable driver-style plastic handle. • 1908 CATV “F” is a combination tool. Use the hex socket to easily remove and insert the connectors. Use the threaded end to hold the connector while you insert cable for connectors.
= new product = Replacement Part = Accessory B = Bare tool RG59/6Q-7/11 Pro Coax Compression Tool • Versatile tool crimps RG59, RG6, RG6 Quad , RG 7/11, BNC and RCA Compression Connectors • Cable holder rotates to accommodate different connector sizes • Adjustable Crimp length accommodates most manufacturers' connectors • Once adjusted, no additional parts or adapters are needed to change from one crimp style to another. Cat. No.
COMMUNICATIONs SealTite® Cable TV “F” Compression Connectors • Large hex nut for easy installations. • Patented design with 360º cable gripping sleeve. • Solid brass construction with nickel plating to prevent UV degradation. RG59 Description SealTite® RCA Compression Connectors Cat. No. RG6 & RG6 Quad RG6 Quad Cat. No. 10 Pack Clamshell PA9642 PA9643 20 Pack Clamshell PA9610 PA9611 50 Pack Jar PA9645 PA9646 100 Pack Bulk N/A PA9614* *Also available in retail jar pack, PA9687. Cat. No.
= new product = Replacement Part = Accessory B = Bare tool Push-On Cable TV “F” Connectors • • • • No crimp tool required. Simply strip cable and push connector onto it. Special knurled nut offers superior grip for strong connection. All brass, nickel-plated for durability and low signal loss. For indoor usage only. RG6 RG59 Description Cat. No. Cat. No. 10 Pack Clamshell PA9682 PA9683 Other Coaxial Connectors Connect CATV “F” cables to RCA plugs.
COMMUNICATIONs Cable TV Splitters • • • • • PA9688 PA9689 Split analog and digital cable TV signals to 2 to 4 outlets. HDTV compatible and works with cable modems. 75 ohm impedence. 5-1000 MHz bandwith. “F”-style female ports. Cat. No. Description PA9688 PA9689 PA9690 2-Way Cable TV Splitter 3-Way Cable TV Splitter 4-Way Cable TV Splitter PA9690 Satellite TV Splitters • • • • • PA9669 PA9670 Split satellite and digital signals to multiple outlets.
= new product = Replacement Part = Accessory B = Bare tool SurePunch® Pro Punchdown Tool • Terminate cable in single punch - including 23 AWG Cat6. • Detachable light with long-life LED specially designed to focus the light on the panel work area. • Luminous intesity of the LED is 2200 mcd. • Finger grips and non-slip rubber-embedded cushioned handle for comfort. • Multi-use spudger that can be used as a screwdriver or an IDC contact insertion tool. • Hook to feed wires through holes.
COMMUNICATIONs SurePunch® Punchdown Tools • Cushion grip, molded to the shape of your hand, for comfort and a sure, non-slip hold. • Increased HI/LO impact force to meet demands of new cable types and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N). • For 28-22 AWG (0.08 - 0.34 mm2), solid or stranded wire. • Uses twist-and-lock style blades. • Cushioned heel for comfort in the palm of your hand. • New latch cover blade storage area in end of handle. • Lanyard holes in end.
= Replacement Part = new product = Accessory B = Bare tool Punchdown Tool • Inserts wire for a corrosion-resistant termination and trims off excess wire. • Terminates 66, 110, BIX and Krone cross-connect and wall jacks. • Spring-loaded for fast, low-effort wire seating and termination. • Internal impact mechanism eliminates jamming for longer, trouble-free service life. • Adjustable low- and high-impact force settings. • Bayonet-style blade locking mechanism. • Neoprene pad for shock absorption.
COMMUNICATIONs Non-Impact Punchdown Tools with Fixed Blades • • • • • • • • PA3580 PA3581 Non-impact, low-cost punchdown tools for 110, 66 & BIX. Works with 28-22 AWG (.08 - .5 mm2). Solid or stranded, single insulation wire. Comfortable rubber handle grip. Performs both cut and punch functions. Perfect for small jobs and the do-it-yourself installer. Fits in the palm of your hand. Typically lower in cost than replacement blades for punchdown tools.
= new product = Replacement Part = Accessory B = Bare tool Jack Terminator • High-grade, hardened steel frame offers superior performance and durability. • Ratcheted action to ensure proper, consistent termination. • Adjustment feature for extra leverage applications. • Quick-change punch sets require no tools. • Removable jack cradle allows for alternate lacing option. • Punch heads can be purchased separately. • Rubber-embedded handles provide extra comfort.
COMMUNICATIONs All-in-One UTP Snagless Crimper • • • • • Cuts and strips round or flat cable. All metal construction. Cushion grips for improved comfort and control. For standard and "snagless" RJ45 connectors. Also crimps RJ11/22 and RJ22 WE/SS style plugs. Cat. No. Description PA1561 All-in-One UTP Snagless Crimper All-in-One Ultra Telephone Tools • • • • • • • • • PA901014 4 crimp functions with a single tool without changing dies. Crimps 4-position RJ22 handset.
= new product = Replacement Part = Accessory B = Bare tool Telephone Ratchet Crimper • Combination tool terminates 8-position, 6-position and 4-position (45575 only) modular style plugs. • No need to change crimping dies. • Full-cycle ratchet mechanism provides consistent, quality terminations every cycle. • Straight action ensures uniform crimp. • Small, compact design. • Built-in wire cutter and stripper for flat cable. • All-steel frame has rust-resistant, black oxide finish. 45553 Cat. No.
COMMUNICATIONs CrimpALL® 8000 Series Crimpers • • • • • • • • • Ultra-smooth, fully ratcheting crimp cycle with built-in safety release. Interchangeable die sets of heat-treated steel for long life. Soft, rubber-embedded handles. Long-lasting tool that delivers over 50,000 crimp cycles. Rugged, double-plated jaw design to increase life span. Lifetime warranty on tool; one-year on die sets. Angled head to prevent awkward wrist bending during operation.
= new product = Replacement Part B = Accessory = Bare tool CrimpALL® Interchangeable Die Sets for Coaxial Connectors description Cat. No. Cat. No. cable type connection CRIMP SIZES Tool with die die only remarks RG58, RG59, RG62AU BNC/TNC and 3 Piece 0.256" (6.5mm, 0.213" (5.4mm), 0.068" (1.7mm) HEX PA8001 PA1317 PA2034 Common 2-piece and 3-piece BNC/ TNC RG174, RG59/62, mini-coaxial 75-ohm HDTV SMA, True 75-ohm BNC/TNC, Mini-UHF 0.255" (6.5mm), 0.197" (5.0mm), 0.178" (4.5mm), 0.
COMMUNICATIONs CrimpALL® Interchangeable Die Sets for Modular Plugs description Cat. No. Cat. No.
= Replacement Part = new product = Accessory B = Bare tool CrimpALL® Interchangeable Die Sets for Insulated Terminal Crimpers description Cat. No. CRIMP SIZES Cat. No. cable type Insulated Terminals and Lugs connection Solid or Stranded Wire, 22-10 AWG (.34 - 6 mm2) 12-10 (Yellow), 16-14 (Blue), 22-18 (Red), (6-4 / 2.5 - 1.5 / .34 - .75 mm2) Tool with die die only PA8021 PA2035 PA1305 remarks For Large Professional Terminals (Panduit, T & B, etc.
COMMUNICATIONs D-sub Indent Crimpers • Adjustable Pin Height Locator • Cushion Grips for comfort. Cat. No. Description PA1460 PA1461 PA1462 D-sub 4 Indent Crimper 26-20 AWG D-sub 4 Indent Crimper 20-12 AWG D-sub 8 Indent Crimper 26-20 AWG Electrical Terminal Crimper • • • • D-sub Pins & Sockets 26-28 AWG. Butt-Insulated Connectors 22-26 AWG. Telephone Piercing Spade Lugs 22-26 AWG. Open Barrel Connectors 14-18, 20-22 AWG. Cat. No.
= new product = Replacement Part = Accessory B = Bare tool Open Barrel Contact Pin Crimper Professional crimping tool for open-barrel box and round connector contacts with a wire range of 30-18AWG (0.05-.
COMMUNICATIONs Kwik Cycle® 9" Crimp Frame • Used to manually crimp a wide variety of connectors and terminals to factory specifications. • Frame features a precision full-cycle ratchet for accurate, repeatable crimps every cycle. • Crimp release lever improves throughput by eliminating rejected terminations due to improper connector positioning. • Frame features a tension adjustment preset at the factory for optimum performance.
= new product = Replacement Part = Accessory B = Bare tool Heat Gun • Electronic variable heat control ranging from 250-1100º F (120-590º C). • Two speeds: high & low. • Double insulation safeguards injury from possible electrical failure inside gun. • Comfortable, lightweight design reduces operator fatigue. • Three nozzles included: window nozzle, deflection nozzle and .47” (12 mm) focusing nozzle. • UL listed. SPECIFICATIONS Power reqs. Current draw Power cons. 120VAC 60 Hz 7.5 amps max.
COMMUNICATIONs HDMI TOOLS A product video is available, scan this QR code or visit: HDMI®* HDFT™ Termination Tool www.youtube.com/GreenleeDEMO • Use with Greenlee 24 AWG HDFT Cable & Connectors. • Terminates cable using HDFT™ connectors and trims excess wire in one step. • Ratcheted handles for uniform, complete crimping cycle. • Interchangeable crimping die sets. • Includes 8000 Series Frame, HDFT™ Die Set and HDFT™ Assembly Fixture. ® ™ Cat No. UPC NO.
= new product = Replacement Part = Accessory B = Bare tool HDFT™ Pro Deluxe Kit • Make custom length, premium HDMI®* cables. • Eliminates cable clutter. • Costs less than pre-terminated cables. 14 Piece Kit Includes: 1) PA1192 HDMI®* HDFT™ Cable Prep Tool (1) PA8700 HDMI®* HDFT™ Termination Tool (10) HDCN24-10 HDMI®* Field Terminating Connectors (1) PA1175 Media Cable Cutter (1) TC-30 Deluxe Carrying Case Cat No. UPC NO.
COMMUNICATIONs WIRE & CABLE IDENTIFICATION Classic 77 Series Tone Generators Features / SPECIFICATIONS 77HP-G 77HP-G/6A 77M-G Selectable Warble Tone Continuity Testing Polarity Testing Talk Battery Supply Two-line Modular Test Lead (RJ-11) Three-color LED (identifies AC ring voltage) Weather-Resistant Design Bent Nose Clips with Bed-of-Nails Penetrator RJ11 & RJ45 socket Lanyard Battery Operated (9V not included) ✔ LED & Beeper ✔ ✔ ✔ ✔ ✔ ✔ LED & Beeper ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ LED ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 77H
= new product = Replacement Part = Accessory B = Bare tool Station Master Pro • Troubleshoot irrigation systems. • Activate and cycle solenoids. • Test solenoids for continuity. • Send tone to identify wires. • Measure clock voltage. • Low battery indication. • Easy-to-understand LEDs. • Test leads with Bed-of-Nails and piercing Pin Clips. • 1-year limited warranty.
COMMUNICATIONs Professional GX Series Tone Generators • • • • • • 77GX • • • • • Microprocessor controlled circuitry for increased reliability. Two-line polarity indication for fast outlet identification. Automatic shutoff to prevent battery drain. Snag-proof boot prevents broken plug tabs. Convenient wrist/hanging lanyard. Three distinct, selectable tone signal outputs for multiple line identification. Two selectable tone power outputs for use on open and shorted pairs.
= new product = Replacement Part = Accessory B = Bare tool LAN Toner with HUB Blink and Detect • The LAN Toner is designed for the network installation and maintenance professional and can be used on any wiring system including datacom, telecom, security/alarm, audio and CATV. • Blinks HUB, Switch Port, and PC activity lights for fast identification. • Detect LAN hubs & switches.
COMMUNICATIONs Alarm Loop Verifier/Tone Generator • Designed specifically for the security and alarm industry, the PE620 can be connected to a Normally Open or Normally Closed loop pair and provides a distinct audible tone when the alarm condition occurs. • Latching feature provides a simple method for identifying intermittent failures (“swingers”) and confirming operation of switches at remote locations.
= Replacement Part = new product B = Accessory = Bare tool Tone Probes Selection Guide model no.
COMMUNICATIONs Filter Tone Probe • By selectively filtering out 60Hz (or 50Hz) and its harmonics, the 200FP can be used with any tone generator for faster, more accurate, cable and wire identification. • Slim, comfortable design for use in limited-space areas. • Recessed on/off push-button control to conserve battery life. • Adjustable sensitivity/volume control to increase accuracy. • Blended carbon/plastic tip to reduce the risk of shorting terminals. • Patented. Cat. No. UPC No.
= Replacement Part = new product B = Accessory = Bare tool Precision Tone Generator • Used in the telecommunications industry for pair identification and fault locating. • Supplies a precise 577.5Hz crystal controlled signal frequency. • Variable output allows technicians to adjust signal strength to suit field conditions and improve accuracy. • Designed to work with any common amplifier and exploring coil for aerial fault locating.
COMMUNICATIONs Classic Tone and Probe Kits • 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP Tone Probe Amplifier in a rugged, woven nylon carrying case (700C). • 601K-G Kit is a more basic version of the 701K-G kit, and includes the 77M-G Tone Generator and the 200B-G Tone Probe amplifier in a zippered nylon pouch. Cat. No. 701K-G UPC No.
= new product = Replacement Part = Accessory B = Bare tool 802K Digital LAN Tracing Kit • The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting and tracing solution for LANs and other types of VDV wiring. The industry standard 200FP filter probe (60Hz) is designed to eliminate hum from fluorescent lights and AC power wiring that can obscure tracing tones.
COMMUNICATIONs Security and Alarm Kit • Designed specifically for the security and alarm industry, the 620K provides a simple method for identifying intermittent failures (swingers) and confirming operation of switches at remote locations. • To better satisfy industry requirements, we’ve combined the Model PE620 Tone Generator with the popular Model 200EP Inductive Amplifier in a durable woven nylon pouch (700C). Cat. No. 620K UPC No.
= new product = Replacement Part B = Accessory = Bare tool Cabling Pouch • Designed to hold a complete set of wiring tools including: any (one) 77 Series Tone Generator, any (one) 200 Series Inductive Amplifier, a punchdown tool, a cabling knife and scissors. • Convenient loop to hold most telephone test sets. • Removable “parts pouch” allows you to keep small components in reach. • Made of a durable woven nylon. • Fits belts up to 5" wide. Cat. No. 750C UPC No.
COMMUNICATIONs STRUCTURED WIRING TESTERS NETcat® Pro 2 NC-500 • • – – – – • • • • • • • NC-500 • • • • Test and troubleshoot telephone, data and coax wiring. NETcat Pro 2 Additional Features: Gigabit device capability detection (still detects 10baseT and 100baseT too). Cable type, velocity of propagation library, user editable. Power over Ethernet (PoE) detection. Memo pad. Detect split pairs, short circuits, broken and crossed wires. Step TDR technology shows length to open or short of all pairs.
= new product = Replacement Part = Accessory B = Bare tool NETcat® Micro NC-100 • Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables. • TIA/EIA standard wiring pair verification. • Detects shorts, opens, reversed polarity, crossed and split pairs. • Generates three distinct, selectable digital tone patterns for cable tracing and troubleshooting. • Tracing modes can be adjusted for high performance LAN cables.
COMMUNICATIONs LAN ProNavigator™ Tester & Remote • Simple PASS/FAIL test results in one second allows technicians to quickly move on to the next test site. • Generates oscillating audio tone for use with tone probes to locate cables. • Tests data and telephone cables up to 320 feet (100 meters) for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and common Category 5 configurations. • Tests unshielded UTP and shielded STP data cable.
= new product = Replacement Part B = Accessory = Bare tool Wiremap Tester • • • • • • • • 468 Quickly identifies opens, shorts, reversals and transposed pairs. Economical tester includes all the basic functions. Connecting the receiver unit automatically activates the test process. Sequencing red and green LEDs provide fast, accurate and simple-to-understand results. Alerts the technician if connected to an active circuit without harming the unit.
COMMUNICATIONs LAN Cable-Check™ • • • • • • • • Identifies cross-over telephone connections. Automatically scans when cables connected and unit turned on. Two scan speeds: fast or slow. Maps connector and cable pin-out. Tests cables up to 1,650’ or 500 m. Also tests RJ11 connections using an RJ11 adapter (not included). 2, RJ45 patch cords and 9V battery included. Contained in a durable nylon carrying case with belt loop. Cat. No.
= Replacement Part = new product B = Accessory = Bare tool CABLE & SERVICE TESTING TM-700 Tele-Mate® Telephone Test Set TM-700 • Complete telephone set with ringer • Phone-to-phone intercom, compatible with other SmartIntercom™ devices • Modular or alligator clip connection • Amplified loudspeaker line monitor • Headset or handset operation • Tone and pulse dialing • Large 10-location speed dialing memory • Multi-memory redial • DTMF digit detection and measurement • Tone output mode • Caller ID with
COMMUNICATIONs Nautilus Range Telephone Test Sets • Waterproof tested to an IEC IP67 rating, these test sets are so impervious to water they can actually withstand submersion, though they actually float. • The PE961 features our DigAlert™ over-voltage alarm and lock-out function to reduce the risk of damaging or knocking out digital service lines. • Built-in DSL Filter. • Ten-number speed dial memory (32 digits each). • Last number redial. • Precise hook flash. • Microphone mute.
= new product = Replacement Part = Accessory B = Bare tool Sidekick® Plus Advanced Cable Maintenance Test Set • • • • 1 Gigaohm Insulation Resistance Advanced Pulse TDR for improved accuracy (Step TDR option available) Improved speed of test and menu selection Long lasting, Li-Ion Rechargeable Batteries Optional Features • Available at Launch: Enable Wideband testing (Software Update) - Noise Spectrum Analysis to 30 MHz - Loss measurements to 4.4MHz - Reference Tone to 4.
COMMUNICATIONs Sidekick® SYNC • ADSL, ADSL2, ADSL2+ and VDSL2 Modem emulation • CPE and Comodem emulation • Isolates problems anywhere along the network • Simple one-button testing for quick deployment • Performs multiple diagnostic tests with only one instrument • Auto Test makes testing customizable and consistent • Easy-to-read digital display reduces meter interpretation errors • Easily determines if the fault is inside or outside the premise • Finds faults other test sets miss • Simplifies troubleshoo
= Replacement Part = new product = Accessory B = Bare tool Sidekick® T&ND • • • • • • • • • • • 1144-5000 Easy-to-read digital LCD display. Internal Dialer for making Transmission Test connections. Autotest – performs 22 individual tests at the touch of a button. Determines the stressed noise susceptibility of dry and working pairs. Measures AC/DC Volts, Leakage, resistance, and loop current. Performs circuit loss, circuit noise (metallic noise), and power influence tests. Built-in open meter.
COMMUNICATIONs Sidekick® 7B 1134-5029 • • • • • • • • Determines the stressed noise susceptibility of dry and working pairs. Measures resistance, AC/DC volts, and capacitive kick. Provides tone for twisted pair or crossed conductor identification. Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground. Minimal drying effect in all ranges. Field replaceable leads. Softcase with adjustable strand hook. Low battery indicator light.
= new product = Replacement Part = Accessory B = Bare tool Throwmaster® Paragon • • • • • • Used by construction cable splicers all around the world. Transfer telephone/broadband services during normal working hours. Does not interrupt important customers. Simple to follow interface and process for successful transfer of circuits. LED's on the cords aid in telling the user in the cut, transfer and splice. Compatible with T-1, HDSL, HDSL-2, HDSL-4, ADSL and other services less than 10Mb/s.
COMMUNICATIONs 4-6-8 Modular Adapters • • • • • • • Nylon-reinforced ABS plastic body. Easy-to-read wire layout. Removable/replaceable patch cord. Inline adapters. Snagless plugs. Belt clip. Notched copper contacts keep alligator clips attached during testing. Cat. No.
= Replacement Part = new product B = Accessory = Bare tool TelScout® TS90 • • • • • • • • • • • • • • Two Pair Test Capability. One-Step Setup. Automatic Instrument Control Mode. 45,000' (15 km) Fault Location Capability. Splash and Drip Proof. Single-Button Zoom Function. Pair Comparison Mode. Splits/Crosstalk Mode. Intermittent Fault Location. Measures Distance to Fault in Feet, Meters, or Time. Configurable for Any Cable Type and Vp (0.300 to 1.000). Accurate (±3 ft. at 10,000 ft.).
COMMUNICATIONs CableScout™ TV220 - TDR Cable Tester for CATV • Easier-to-use GUI interface requires little or no training • PC application is compatible with all the current operating systems • Improved clarity and trace functionality makes it even easier to identify faults on-screen and determine noise versus the fault • Even higher SNR and Resolution makes it easier to identify events that were previously difficult or impossible to find • Zero dead zone at the launch allows the user to see faults immediat
= new product = Replacement Part = Accessory B = Bare tool CableScout™ TV90 • High performance easy to use, Time Domain Reflectometer for Coaxial testing applications. • Employs optimized pulsing and sampling, coupled with advanced filtering and signal-processing techniques to ensure clean waveform and easy identification. • Context-sensitive help screens for all functions. • Small, portable and lightweight 2.2 lbs. (1kg). • Includes rechargeable battery pack.
COMMUNICATIONs BURIED FACILITY LOCATION AND MARKING Tracker II • Traces the path and determines the depth of wires and metallic pipes on active or dead systems without having to deactivate the system. • Lightweight receiver provides audible and visual indications of signal strength. • Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy. • Transmitter offers three methods of connection: direct, inductive coupler and inductive antenna.
= Replacement Part = new product = Accessory B = Bare tool Pulser Fault Locator PE2003 Great complement to any buried line cable locator. • Identifies the exact location of even the smallest breaks in insulation by “pulsing” a high-voltage signal that radiates into the earth at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.
COMMUNICATIONs Wire and Valve Locator • Adjustable transmit power allows you to select the best signal for maximum performance. • Transmitter’s high power output offers extended range and use on higher resistance wire paths that other locators can’t touch. • Receiver provides both audible and visual indications of signal strength. • Lightweight receiver wand makes it easy for you to move along quickly to locate even the longest wire path.
= new product = Replacement Part = Accessory B = Bare tool Marker-Mate® • Designed to locate buried electronic markers, including Omni Marker®, and Uni Marker™ • Five+ foot depth range • Detects up to seven different marker types • Scan mode provides simultaneous detection of all marker types • User-adjustable Detection Threshold • Digital signal processor accuracy • Large-character display is easy to read • Bar graph, numeric & audible signal strength indicators • Speaker volume adjust • Headphone jac
COMMUNICATIONs Uni Marker™ • Electronically marks buried facilities for later relocation. • Rugged polyethylene case ensures years of useful life. • Small size and flat design attach easily to non-metallic utility box lids, hand holes and other buried enclosures. • Location is simple with any modern marker locator. • Range is 25% more than other similar-style markers. • Signal peak ensures location within inches of the marker. • Color coded by utility application.
= new product = Replacement Part B = Accessory = Bare tool COMMUNICATIONS KITS GripPack Quick-Release Tool Holster • Easy-on, easy off with new quick-release belt clip. • Belt clip swivels so the holster moves with you and the tools stay out of your way. • Form fitted PVC material ensures that tools don’t fall out even if you drop your kit or they are upside down.
COMMUNICATIONs Ultimate Technician Kit Cat. No. Description weight PA4932 Ultimate Technician Kit 7.
= new product = Replacement Part = Accessory B = Bare tool Ultimate Coax Compression Tool Kit This kit is for installing home theaters, HDTV, satellite and digital cable TV systems. It contains everything needed for new home construction or retrofitting sophisticated A/V solutions. Cat. No. Description weight PA4939 Ultimate Coax Compression Tool Kit 8.
COMMUNICATIONs Ultimate Data/Voice Pro Kit This complete kit is for data and voice installation and maintenance stored in the new versatile Ultimate Tool Bag. Cat. No. Description weight PA4935 Ultimate Data/Voice Pro Kit 4.
= new product = Replacement Part B = Accessory = Bare tool SealTite® Pro A/V Kit The new SealTite® Pro A/V kit is all you need to make custom length digital and analog audio and component video cables using compression RCA, BNC and cable TV "F" connectors. Cat. No.
COMMUNICATIONs CoaxReady™ Compression Tool Kit Adding to our CoaxReady solutions, this kit has everything you will need to terminate any manufacturers' cable TV "F", RCA or BNC compression connectors using RG6, RG6 Quad or RG59 cable sizes. • 12 piece kit • Includes zippered cordura portfolio case Cat. No. Description weight PA906003 CoaxReady™ Compression Tool Kit 3.
= new product = Replacement Part = Accessory B = Bare tool Telco Technician Tool Kit Cat. No. PA4938 Description Telco Technician Kit Weight 7.
COMMUNICATIONs DataComm Pro Starter Kit Max This kit is also a starter kit for datacomm professionals. • 66 piece kit • Includes the complete solution for cutting, crimping, and terminating • All the tools included come in a compact zipper case Cat. No. Description weight PA4908 DataComm Pro Starter Kit 1.
= new product = Replacement Part = Accessory B = Bare tool DataReady™ Kit The complete Category 5 datacomm tool set in a handy zipper case. Everything needed for a CAT-5 installation except the cable. Cat. No.
COMMUNICATIONs Network Tool Bundle This new bundle provides the perfect solution for DIYers that want to use professional tools or for small contractors just starting out installing networks. It includes everything you need but the cable to get the job done. Cat. No. Description weight PA4909 Network Tool Bundle 18.
= new product = Replacement Part = Accessory B = Bare tool Computer Service Kit • • • • • • • • • • 3.6V cordless screwdriver, battery & charger. ESD wrist strap. 30-watt soldering iron. Desolderer & soldering aid with pick & scraper/cutter tip. Needle nose pliers (2). Angled-head lead cutter. Insulated tweezers. Component gripper & IC extractor. 10-piece driver socket set. 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted, and SquareHead.
COMMUNICATIONs TERMINATION & TESTING Voice and Category 5 Data Termination Kit • Includes the tools and connectors necessary for installing a voice and data network. • Durable Cordura® Plus zipper case protects and organizes tools and includes a see-through pouch for storing connectors. • Outside pockets provide convenient storage of instruction manuals or worksite documents. Cat. No. 45469 UPC No.
= new product = Replacement Part = Accessory B = Bare tool FIBER OPTIC hand TOOLS ProGrip 5-in-1 Fiber Optic Stripper • Precision ground stripping cavities for: – 2.0 - 2.4 mm outer jacket – 2.0 - 3.0 mm loose tube – 2.8 - 3.0 mm outer jacket – 900 µm buffer insulation – 900/125 µm and 250/125 µm buffer/acrylate • Factory calibrated. Cat. No. Description PA1171 ProGrip 5-in-1 Fiber Optic Stripper ProGrip 3-in-1 Fiber Optic Stripper • Precision ground stripping cavities for: – 2.
COMMUNICATIONs Fiber Products Pocket Cable Stripper • Specifically designed for stripping power and telecommunications cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm). • Strips solid conductor, stranded conductor and multiple conductor cables. • Easy blade depth adjustment. • Blade rotates for circular, longitudinal and spiral cuts. cat. no. 1903 13544 13545 13546 upc no.
= new product = Replacement Part = Accessory B = Bare tool Fiber Optic Inspection Microscope • High-powered microscope is used to check a connector’s endface for excess epoxy, core or cladding chips or other irregularities that degrade optical performance of the connector. • Laser safety filter protects eyesight. • Rubber eyecup for comfortable use. • Rugged aluminum housing. • 200X magnification. • Universal adapter works with ST, SC or FC connectors. • Includes padded nylon carrying case. Cat. No.
COMMUNICATIONs Fiber Products FIBER OPTIC testing 525-90 PON Optical Loss Test Set • 1310/1490/1550nm. • Automated Insertion/Return Loss measurements. • One button AUTOTEST. • Stores 1000 measurement results. • Cable acceptance software for report generation and fiber optic cable management. • Optical power meter. • Optical return loss meter. • Rechargeable batteries. • Rugged package for outside plant environment. Cat. No. UPC No.
= new product = Replacement Part B = Accessory = Bare tool 525-60 Smart Optical Loss Test Set • • • • • • • • • Automated bi-directional testing. Optical return loss measurements. Dual wavelength insertion loss measurements. Multi-mode and Single-mode models feature user settable PASS/FAIL thresholds. Communications between units via messaging. Wide dynamic range optical power meter. Test record storage and data management software. Rugged outside plant instrument package.
COMMUNICATIONs Fiber Products 525-30 Smart Optical Loss Test Set • • • • Automated dual cable testing. Optical return loss measurements. Dual wavelength insertion loss measurements. Multi-mode and Single-mode models feature user settable PASS/FAIL thresholds. Communications between units via messaging. Wide dynamic range optical power meter. Test record storage and data management software. Rugged outside plant instrument package. Universal connector interface. • • • • • Cat. No.
= new product = Replacement Part = Accessory B = Bare tool Silicon Fiber Optic Power Meter • • • • • • • • Easy to use - three buttons control all functions Loss measurements in (dB); power measurements in (dBm) 0.01 dB measurement resolution Snap on connector interface adapts to FC, SC and ST connectors. Contact Greenlee for other available adapters. Long battery life User selectable auto shut-off Rugged and splash-proof Economically priced Cat. No. UPC No.
COMMUNICATIONs Fiber Products 850/1300 nm LED Source • 850/1300 nm wavelengths. • Stable calibrated output. • Easy to use. • Continuous wave and modulated output. • Fixed connector interface FC, SC or ST. • Long battery life - approx. 80 hours. • User selectable auto shut-off. • Rugged and splash-proof. • Economically priced. Cat. No. UPC No.
= new product = Replacement Part = Accessory B = Bare tool 650 nm LED Source for Large Core Plastic and Glass Fiber • • • • • • • • • 650 nm wavelength Stable calibrated output Easy to use Continuous wave and modulated output ST connector interface Long battery life - approx. 24 hours User selectable auto shut-off Rugged and splash-proof Economically priced Cat. No. 573XL-ST 573XL-UNIV UPC No.
COMMUNICATIONs Fiber Products 850 nm LED Source with AS-100 Launch Condition using 100/140 Fiber • • • • • • • • • 850 nm wavelength Stable calibrated output Easy to use Continuous wave and modulated output Universal connector interface Long battery life - approx. 24 hours User selectable auto shut-off Rugged and splash-proof Economically priced Cat. No. UPC No.
= new product = Replacement Part B = Accessory = Bare tool Singlemode Fiber Optic Test Set • Insertion loss test set for singlemode fiber. • 1310/1550 nm loss measurements. • Connector for FC, SC or ST. • Rugged package design. • Easy to use portable package. • Economically priced. kit SPECIFICATIONS Cat. No. UPC No.
COMMUNICATIONs Fiber Products Visual Fault Finder • Continuous wave output mode for steady fault location. • Find breaks to 5km. • Blinking output mode increases viewing contrast. • Easy to use quick interface fits all 2.5mm connector interfaces (FC, SC, ST). • 1.0mW output power. • Ergonomic rotary switch permits easy one-handed operation. • Rugged, compact and splash-proof aluminum design. • Two AA batteries provide 48 hours continuous operation. • Nylon belt holster included.
= new product = Replacement Part = Accessory B = Bare tool 920xc Handheld Multimode OTDR • • • • • • • • • • Economical. Compact handheld design. Easy to use. Fast automated testing. Up to 22 db dynamic range. Large backlight LCD display. Measure length and defects of coiled fiber. Fiber analysis software for data management and report generation. RS-232/USB interface. NiMH batteries for 8 hours continuous use.
COMMUNICATIONs Fiber Products 920xc Handheld Singlemode OTDR Cat. No. UPC No.
= new product = Replacement Part = Accessory B = Bare tool Optical Fiber Monitors OFM1020 • mm Resolution. • Zero Deadzone. • 90dB Return loss dynamic range. • 850/1300 nm operation. • Measure optical components, cables and sensors. • Monitor bend loss and fiber stress. • Universal optical interface. • Ruggedized for field deployment. • AC/DC operation. • Custom configurations available (fiber, outputs, wavelengths). OFM1020 OFM130 • mm Resolution. • Zero Deadzone. • 85dB Return loss dynamic range.
COMMUNICATIONs Fiber Products Fiber Optic Instrument Adapters – SOC and UCI • Our SOC and UCI adapters provide direct connectivity for Tempo fiberTOOLS® to a wide range of industry-standard fiber optic connectors. • Adapter design ensures maximum accuracy and repeatability when performing critical measurements on fiber optic systems. • Easy to clean and use. • Single-mode and multimode compatible. • SOC adapters are compatible with both PC and Angled APC physical contact interfaces.
= new product = Replacement Part = Accessory B = Bare tool FIBER OPTIC kits Fiber Optic Termination Kit • Contains all of the tools and consumable materials necessary for epoxy and polish connector terminations. • Durable Cordura® Plus carrying case protects and organizes tools and includes see-through pouches for storing connectors. • Outside pockets provide convenient storage of instruction manuals or worksite documents. Cat. No. UPC No.
COMMUNICATIONs Fiber Products FiberReady Tool Kit This kit contains an assortment of cable sliters, strippers and Kevlar® cutters to prep fiber optic cable along with our 1600 Series premium crimper with interchangeable dies. Cat. No. Description weight PA906001 FiberReady Tool Kit 3.
