Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Plotting 85
Figure 3-18 Real-time Data Control Panel
Parameter Descriptions
This table describes the parameters of the data control panel.
Ta b l e 3- 5 Data Control Panel Parameters
Plotting a Real-time Line Graph from a Table
To plot a line graph of all statistical data in a table or a selected table row,
follow this procedure:
1. Right-click anywhere on the table, to open the plotting options.
2. Navigate the cursor to Plot Selected Row.
3. Choose the following:
a. All to plot statistical data from the entire table;
b.Desired_Data to plot statistical data for a selected row.
4. Select the Sample Rate and Data Points that you want to plot. Refer to
Figure 3-20.
Data Control Description
Sample Rate Contols the sampling rate. Data is sampled at
approximately every two seconds. You may
sample data for up to 52 seconds.
Data Points Controls the number of data points to be
plotted. You may plot up to 90 data points.
Pause/Resume A toggle button used to freeze and restart
the plotting.
Close Exit out of the graph.