Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Browsing Cable Modem and MTA Status 629
Browsing Cable Modem and MTA Status
The Cuda 12000 supports the retrieval and display of status information that
is maintained by individual cable modems and MTAs connected to the HFC
network. This information is useful when you have to monitor the network
and troubleshoot network problems.
To retrieve and display this status information:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > CMTS > Interfaces.
2. Click the Cable Modems tab.
3. Click the CM/MTA tab.
Table 22-3 Tabs for Accessing Cable Modem and MTA MIB Tables
Tab Name MIB Table or Group
CM Status CM Status (docsIfCMStatusTable). Refer to
Table 22-6 on page 633.
CM MAC CM MAC (docsIfCmMacTable). Refer to
Table 22-4 on page 632.
CM Service CM Service (docsIfCMServiceTable). Refer
to Table 22-5 on page 632.
Downstream Downstream
(docsIfDownstreamChannelTable). Refer to
Table 22-7 on page 634.
Upstream Upstream (docsIfUpstreamChannelTable).
Refer to Table 22-8 on page 635.
Signa Quality Signal Quality (docsIfSignalQualityTable).
Refer to Table 22-9 on page 636.
QoS QOS (docsIfQosProfileTable). Refer to
Table 22-10 on page 637.
BPI > BPI Base BPI Base (docsBPICMBaseTable). Refer to
Table 22-11 on page 638.
BPI > BPI TEK BPI TEK (docsBPICMTEKTable). Refer to
Table 22-12 on page 642.
BPI > BPI Plus Base BPI Plus Base (docsBpi2CmBaseTable). Refer
to Table 22-13 on page 644.
BPI > BPI Plus TEK BPI Plus TEK (docsBPI2CmTEKTable). Refer
to Table 22-14 on page 649.