Technical information

ADC Telecommunications, Inc.
618 C
HAPTER 21: CONFIGURING SUBSCRIBER MANAGEMENT
Viewing Packet Filter Groups
You can view the current packet filters for all cable modems. To view the
cable modem packet filters, follow this procedure:
1. From the Summary window, select the Group ID for the filters you wish to
view. The filters for that selected group appears in the adjacent table.
2. Click Refresh to update the window information.
What You See
Figure 21-5 Summary window.
Parameter Descriptions
The following table lists the matching criteria parameters that you configure
to create global Subscriber Management filter groups on the Cuda 12000.
Table 21-5 Summary Window Parameters
Parameter Description
Packet Filter Groups
Group ID Identifies the ID for the set of filters specifications. You
can associate a cable modem and CPE device with a filter
group for its upstream traffic and a filter group for its
downstream traffic. A cable modem and CPE device can
also use the same filter group for upstream and
downstream within the group. Allowable values range
from 1 to 60.
Num Filters Number of filters located in a group. Allowable values
range from 1 to 40.
Filters in Selected Groups
Filter ID Identifies the ID for the filter within the selected group.