Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
617
Parameter Descriptions
This table provides a description of the Filters window:
Table 21-4 Subscriber Management Filters Window Parameters:
Configuring Global Subscriber Management Filter Groups
Configuring global filter groups on the Cuda 12000 involves defining the
matching criteria to be used globally across the Cuda 12000.
You can configure up to 60 global filter groups. Each filter group may
contain up to 40 matching criteria rules.
Before you configure the matching criteria for global Subscriber
Management filter groups, bear in mind that you may use Subscriber
Management filter groups in addition to the IP packet filtering system, which
is the default on the Cuda 12000.
Before You Begin
Before you begin to configure the cable modem packet filters and groups,
follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > IP > CM Packet Filters.
2. The Summary window appears.
Parameter Description
Subscriber
Downstream Filter
Group
The ID of the filter group that you specify to be the
default filter group, to be used by CPE devices for
downstream traffic.
Subscriber
Upstream Filter
Group
The ID of the filter group that you specify to be the
default filter group, to be used by CPE devices for
upstream traffic
.
Cable Modem
Downstream Filter
Group
The ID of the filter group that you specify to be the
default filter group, to be used by cable modems for
downstream traffic
.
Cable Modem
Upstream Filter
Group
The ID of the filter group that you specify to be the
default filter group, to be used by cable modems for
upstream traffic
.