Technical information

ADC Telecommunications, Inc.
616 C
HAPTER 21: CONFIGURING SUBSCRIBER MANAGEMENT
Assigning Subscriber Management Default Filters
To assign subscriber management default filters, follow this procedure:
1. From the Cable Modem Subscriber Management Summary window,
select the row that includes the MAC address of the cable modem behind
which the specific CPE is attached.
2. Click the Filter Groups tab. The Subscriber Management Filters window
appears.
3. Enter values for the parameters. Refer to Table 21-4.
4. Click Apply to commit the changes or Reset to return the window to the
default values.
What You See
Figure 21-4 Subscriber Management Filters Window
Learnable Indicates if the ability to learn IP addresses is enabled or
disabled. If the check box is enabled, the CMTS can learns CPE
IP addresses up to the value configured in the MAX IP
parameter. If the check box is cleared, the CMTS does not
learn CPE IP addresses.
Parameter Description