Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
615
What You See
Figure 21-3 CPE Subscriber Management Settings Window
Parameter Descriptions
This table provides a description of the CPE Configuration window
parameters:
Table 21-3 Subscriber Management Settings Window Parameters
Parameter Description
Max IP hosts Number of simultaneous CPE IP addresses you can attach to
the cable modem. If this parameter is set to zero, the cable
modem drops all CPE traffic. This value is invalid if the Active
parameter is set to False. By default, Max IP hosts is set to 16.
Allowable values are 1 to 16.
Active Indicates the status of subscriber management. If the check
box is enabled, the CMTS-based CPE control is active and all
actions required by the various filter tables and controls apply
at the CMTS. If the check box is cleared, no subscriber filtering
is applied at the CMTS.