Technical information

ADC Telecommunications, Inc.
614 C
HAPTER 21: CONFIGURING SUBSCRIBER MANAGEMENT
Parameter Descriptions
CPE Summary Window parameters
Table 21-2 :CPE Summary Window Parameter Descriptions
Configuring CPEs for Subscriber Management
To configure the default information for a cable modem, follow this
procedure:
1. From the Cable Modem Subscriber Management Summary window,
select the row that includes the MAC address of the cable modem behind
which the specific CPE is attached.
2. Click the CPE Configuration tab. The Subscriber Management Settings
window appears.
3. Enter values for the parameters. Refer to Table 21-3.
4. Click Apply to commit the information or click Reset to return to the
default values.
Parameter Description
CPE IP Address IP address for the attached CPE.
CPE MAC Address The MAC address of the cable modem behind which the
CPE device is attached.
Source Indicates how the entry was created. The options are:
■ manual
■ learned
■ other