Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Viewing Classifiers 601
IP Dest Port End Specifies the low end inclusive range of TCP/UDP
destination port numbers to which a packet compares.
Dest MAC Addr Indicates the destination MAC address. An Ethernet
packet matches an entry when the destination MAC
address equals the destination MAC mask.
Dest MAC Mask Indicates the destination MAC mask. An Ethernet
packet matches an entry when the destination MAC
address equals the value of the destination MAC mask.
Src MAC Addr Indicates the source MAC address. An Ethernet packet
matches an entry when the source MAC address
equals the value of this parameter.
Enet Protocol Type Indicates the format of the Layer 3 protocol identifier in
the Ethernet packet. The options are:
none Rule does not use the Layer 3 protocol type as a
matching criteria.
ethertype Rule applies only to frames that contain an Ethertype
value.
dsap Rule applies to frames using IEEE802.3 encapsulation
format with a Destination Service Access Point (DSAP).
mac Rule applies to MAC management messages.
all Rule applies to all Ethernet packets.
Enet Protocol Indicates the packet class Ethernet protocol. The
options are:
none Parameter is ignored when considering whether a
packet matches the current rule.
ethertype Indicates the 16-bit value of the Ethertype that the
packet must match to match the rule.
dsap Lower 8-bits of the value must match the DSAP byte of
the packet to match the rule.
mac Indicates the lower and upper 8-bits of this object
represent the upper and lower bound of MAC
management messages.
User Priority Low Applies to Ethernet frames using the 802.1P/Q tag
header. Tagged Ethernet packets must have a 3-bit
priority field within the range of the low and high
priority to match this rule.
Table 20-16 Details Window Parameters (continued)
Parameter Description