Technical information

Cuda 12000 IP Access Switch CudaView Administration Guide
Viewing Service Flows 589
Viewing Service Flows
At least two Service Flows per DOCSIS 1.1 cable modem configuration files
must be defined, one for the upstream and one for the downstream. The
first upstream Service Flow describes the primary upstream Service Flow and
is the default Service Flow used for unclassified traffic. The first downstream
Service Flow describes service to the primary downstream Service Flow.
Before You Begin
To view defined Service Flows, follow this procedure:
1. Navigate to Network Browser > GroupName > ChassisName > Cuda
Chassis Manager > Configuration > CMTS > Interfaces.
2. In the Interfaces window, select the interface that you want to view.
3. Click the Cable Modems tab.
4. Click the Status Summary tab. The Status Summary window appears.
5. Select the DOCSIS 1.1 cable modem for which you want to view.
6. Click the Service Flow tab. T
7. Click the Summary tab. All defined Service Flows for provisioned DOCSIS
1.1 cable modems are displayed.
8. Click Refresh to update the information.